^^^ Just to expand on what HC suggested...get 2 lengths of 75 (or 90) x 45 pine mounted vertically from floor to ceiling or what ever height, buy a 35mm spade-bit & a few lengths of 35mm dowell, set up a jig to make sure all dowells are the same angle (apx 5deg off square if you want boards to lean back a bit) & drill at about 150mm centres for adjustment, cut dowell to suit (just under) board width, bolt/screw the 2 lengths of pine to wall & set dowells to suit - voila!
PS something like this - image off interweb.
Hi Scott79,
This is one of the racks in our shop. Simple rack with dowel rods and 2" x 3" pine uprights bolted and glued to the posts.
Simply cover the 22mm dia dowels with a cut pool noodle and voila!
We use it for our race boards as they are too long to go vertical in the building.
DM
waiting for Zeusman to post his, he had the best racks, with accessories
Note have yet to have the pleasure of meeting The Zeusman, but do know the supplier of his accessories...........
The single biggest cause of snapped leggies is wrtapping them around your fins and storing them this way.
UNWRAP THOSE LEGGIES NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
E T said... The single biggest cause of snapped leggies is wrtapping them around your fins and storing them this way.
UNWRAP THOSE LEGGIES NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
And hang them up so they are straight not coiled when you use them.
E T said... The single biggest cause of snapped leggies is wrtapping them around your fins and storing them this way.
UNWRAP THOSE LEGGIES NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
And hang them up so they are straight not coiled when you use them.
IMO leggies are optional in crowded line up of SB's.
E T said... The single biggest cause of snapped leggies is wrtapping them around your fins and storing them this way.
UNWRAP THOSE LEGGIES NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
And hang them up so they are straight not coiled when you use them.
IMO leggies are optional in crowded line up of SB's.
