|
|
New puppies out at Scarbs today 
 |
|
|
Nice looking boards.
I'm not a wave sailor, but isn't cross-sideshore a tortology?
|
|
|
and just like shay laren's puppies, one is bigger than the other  |
|
|
They look sick! No fancy colours. Just plain white for that surfboard look. How did they go? I bet they ride unreal Rider? Years of experience right there. Cant wait to try them  |
|
|
i heard he likes his old board better?
|
|
|
easty said...
Nice looking boards.
I'm not a wave sailor, but isn't cross-sideshore a tortology?
You'll need to dumb that statement down a bit for me, maybe just the word at the end.
I figure onshore(direct) is blowing straight on from sea to land
Cross onshore from sea to land but at an angle
cross sideshore wind blows parrallel to the coast
cross offshore land out to sea but at an angle
offshore straight out to sea from land.
|
|
|
Leech said...
i heard he likes his old board better?
Hmm maybe! I think after sailing my old board(below) 98% of the time for the last 3 years(and I do a lot of sailing), the board and I have become one! It's like an extension of me.
|
|
|
Rider5 said...
easty said...
Nice looking boards.
I'm not a wave sailor, but isn't cross-sideshore a tortology?
You'll need to dumb that statement down a bit for me, maybe just the word at the end.
I figure onshore(direct) is blowing straight on from sea to land
Cross onshore from sea to land but at an angle
cross sideshore wind blows parrallel to the coast
cross offshore land out to sea but at an angle
offshore straight out to sea from land.
If you couldn't find it in the dictionary it's because I misspelt it. 
Tautology: "saying of the same thing twice over in different words"
(Aust. Oxford English Dictionary)
Basically I thought a "cross" wind would be a "side" wind, so "cross shore" and "side shore" mean the same thing, so saying "cross side shore" is repeating the concept of where the wind is blowing from twice.
But don't worry, I'm just being very pedantic because there's been no wind.
|
|
|
I really like the solid bold colours you use on your boards Rider.
Have you tried any other techniques in applying colour?
|
|
|
|
Yeah, I thought you were going for resin tinting this time?
|
|
|
|
|
|
I agree with you Mark.
Resin tinting looks too muddy  |
|
|
Nah looks nice, Hoops ones that look like swirls in bowling balls are nice. Troppo's one is one of the nicest boards I've ever seen.....
but for me I'd still go all white and any designs that are on the board stop a good 5mm in from the rails
|
|
|
Graphics is a bit of a damned if you do damned if you don't thing.
Make a nice white board and people will tell you it's too booring. Make a really loud ,out there paint job and people tell you it's too over the top.
That's the good thing about custom boards, you can do what you want.
Nice looking boards by the way Mike. (bit booring looking though  ) |
|
|
"damned if you do damned if you don't thing" yep you can please some of the people some of the time but not all of the people all of the time I copped a bit years ago from strangers when I did a board for myself with huge strawberries on it  , I like strawberries Each to his own.
Leech said...
Yeah, I thought you were going for resin tinting this time?
I did !
I coloured the epoxy laminated white, I read a while back that tints and pigments can weaken the resin matrix a bit, even at the 2 to 3% they recommend and that the liquid tints produce a slightly weaker laminate than the powder( I've searched the net for ages looking for the article again, but I cant find it  ) So I sourced a powdered form of opaque tint and added it to my resin.
I didn't do the swirl thing as after doing many, many test panels with liquid and powdered pigments I couldn't get the clarity I was after, see pics below of what I was after and as the boards were for me I didn't want the "muddy" look, so I went for boring white.
After a lot of research I found out that as epoxy takes so long to set, the colours bleed into each other, but if done in polyester resin as in the pics you can mix in an additive to make it set within minutes giving clean clear definitions. like below
I love this board below
|
|
|
Wow, looks like tie-dyed, we need more graphics like the old glass boards
|
|
|
|
That orange firey sort of one looks awesome! Is the finbox glassed over at that stage?
|
|
|
Squid Lips said...
That orange firey sort of one looks awesome! Is the finbox glassed over at that stage?
I'm not sure I just grabbed the pics of swaylocks showing what is being done in surfboards I don't think the box has been put in yet or he may just glass on the fins, I think the guy who did that one is a living legend.
|
|
|
WHOA OAH BLACK BETTY....... BAM A LAM.....
Just glassed before filler coat. Shame I gotta make it a lighter colour to stop our hot sun cooking it.
|
|
|
Can i have one of thease puppies???
|
|
|
That is awesome.
|
|
|
flipper4444 said...
Can i have one of thease puppies???
Well Flip been readin lots of your amusing posts and well er Im not sure your ready for one of these puppies yet  They're for em err hmm more responsible em older people, you'd have to treat them right, exersize them regularly(not sure if thats possible in Vic), wash them and look after them. It's a big job maybe in a few years time
In the meantime might I suggest role modelling yourself on KOTP
|
|
|
Almost finished, gone for the sanded through paint look.
 |
|
|
|
very nice....
can i come over and have a go on one soon  |
|
|
very nice  |
|
|
thats one good lookin' board you have made there mike!!
love the sanded back look.
on ya.
|
|
|
Windy - No ! You've got your own Rider and if you come back the wind will stop, we are very grateful for your sacrifice.
Keef - Thanks
Dave - Thanks mate, havent seen you around in ages.
|
|
|
Dave - Thanks mate, havent seen you around in ages.
yeah mike, young kids stop me from getting out as much as I use to.
mainly play 'flat water fairy' at pinaroo for an hour here and there in the summer season.
|
|
|
Love the look of the boards Rider....
The clean crisp look works for me.
Shapes look great too. |
|
|
dave.h said...
thats one good lookin' board you have made there mike!!
love the sanded back look.
on ya.
it is not sanded back he's just pretty ordinary with the spraygun
|
|
|
|
hey mike,
what's the estimated volume, and whats with the squared of tail? is the board for light wind ?
|
