Forums > Windsurfing General

dinosaur mast base

Reply
Created by tassiesnafu > 9 months ago, 12 Feb 2017
tassiesnafu
5 posts
12 Feb 2017 5:33AM
Thumbs Up

I liberated this Jurassic age Windrush Fun 11 from the local tip. It's in reasonable condition and I'd like to get up and running. I've got a mast but the base fitting doesn't match the sliding fitting on the board.
Perhaps someone might be able to help me get hold of a suitable fitting.

Mark _australia
WA, 22090 posts
12 Feb 2017 1:20PM
Thumbs Up

I reckon best to just use a new style one where the nut slides in the mast track - just a bigger nut.
If you cant find one, its easy enough to get a bit of scrap stainless plate and tap a thread thru it

remery
WA, 1887 posts
12 Feb 2017 5:25PM
Thumbs Up

I had this brass fitting made up many years ago when you couldn't buy the plastic ones any longer. I probably should upgrade.


tassiesnafu
5 posts
12 Feb 2017 6:19PM
Thumbs Up

Thanks for that Agrid, now I understand what one looks like and how it works. I might just get some high density plastic and spin one up on a lathe.

cs66
VIC, 23 posts
12 Feb 2017 9:37PM
Thumbs Up

Looks like a similar track to a Mistral One design. I have one and use a standard euro pin mast base and brass plate with a thread that you can either make or buy www.windance.com/Mistral-8mm-Mast-Track-Slider/2359/

Can't adjust it while sailing but I'm not that technical a sailor to need that anyway. I just hold it in with a finger while screwing the mast base in.

joe windsurf
1480 posts
12 Feb 2017 8:17PM
Thumbs Up

originally tried to post about Fanatic CAT mast base - same as this one
that is difficult to find tho ...
as people have suggested, with that track you can make a metal plate with a hole in it
NO thread required - bolt standard Chinook base through the hole
did that with my Mistral Equipe One

remery
WA, 1887 posts
12 Feb 2017 9:51PM
Thumbs Up

I can measure if you like.

tassiesnafu
5 posts
13 Feb 2017 4:34AM
Thumbs Up

That would be great if you could measure it for me.
Thanks!

remery
WA, 1887 posts
13 Feb 2017 2:18PM
Thumbs Up

This any help? Mine is pretty worn but still stays in. The plastic ones never used to last that long so I had one made up in brass.


tassiesnafu
5 posts
13 Feb 2017 6:38PM
Thumbs Up

That looks great. I think I'll go for a metal one as well.
Will be nice to get back into windsurfing.....it's only been around 30 years!



Subscribe
Reply

Forums > Windsurfing General


"dinosaur mast base" started by tassiesnafu