Forums > Kitesurfing Gear Reviews

Ion CS harness slider bar

Reply
Created by richswing 4 months ago, 13 Feb 2018
richswing
WA, 713 posts
13 Feb 2018 9:52PM
Thumbs Up

Anybody know how to change the rope out on a IOn CS Hardshell slider bar?

There are 3 Allen key screws holding a piece of plastic that covers where you would normally put the steel hook addon but they are non metric and I can't see if it locks the rope on the pad.

Cheers
Rich

toppleover
QLD, 1336 posts
14 Feb 2018 5:39AM
Thumbs Up

Have a look here mate.

www.kiteforum.com/viewtopic.php?f=1&t=2398438&hilit=Ion+cs&start=40

richswing
WA, 713 posts
14 Feb 2018 2:49PM
Thumbs Up

Thanks

Andrash
WA, 552 posts
14 Feb 2018 4:53PM
Thumbs Up

...well, before starting to cut out pieces of a bar, check out those alon-like keys, they may have a funny star shape. I have a set to open those. I can't thing seriously that a designer would not allow the "peaceful" replacement/adjustment of the sliding rope.

toppleover
QLD, 1336 posts
14 Feb 2018 7:30PM
Thumbs Up

Select to expand quote
Andrash said..
...well, before starting to cut out pieces of a bar, check out those alon-like keys, they may have a funny star shape. I have a set to open those. I can't thing seriously that a designer would not allow the "peaceful" replacement/adjustment of the sliding rope.



If you read the thread on KF you will see that Dan works for ION/North & this is the fix.
They (ION) are only human & overlooked this issue, I'm planning to get a CS Wave harness when the slider is sorted in the 2019 model .

Looks to me like a great bit of kit.



Subscribe
Reply

Forums > Kitesurfing Gear Reviews


"Ion CS harness slider bar" started by richswing