Forums > Windsurfing General

Deck Pad Repair

Reply
Created by Allan51 > 9 months ago, 17 Mar 2015
Allan51
1 posts
17 Mar 2015 1:45AM
Thumbs Up

There is a hole on the deck pad of my board. Seeking suggestions for the best repair method. See pic.









pirrad
SA, 850 posts
17 Mar 2015 5:08AM
Thumbs Up

If your talking about the pattern matching, almost impossible.
I would cutout something like a star shape to pick up the outer damage.
(put one the other side of the board to match it up)

pepe47
WA, 1206 posts
17 Mar 2015 9:00AM
Thumbs Up

Well, maybe not impossible.

Hydroturf is the stuff you want. Jet ski places, ebay etc. Gently remove the old padding with a paint scraper, then line the new padding up (trimmed to size). Paint the back of the padding and the place on the deck where it will go, wait till it dries, then press it into position. Use a dremel to trim the holes and Bob's yer uncle.

Don't be tempted to use anything other than contact cement

Mark _australia
WA, 18971 posts
17 Mar 2015 1:54PM
Thumbs Up

Allan I have some hydroturf in same pattern, can post you a square to insert in there



Subscribe
Reply

Forums > Windsurfing General


"Deck Pad Repair" started by Allan51