Forums > Windsurfing General

Mast Compatibility

Reply
Created by Bertelo > 9 months ago, 29 Sep 2021
Bertelo
9 posts
29 Sep 2021 12:44AM
Thumbs Up

Will a 2016 NORTH Platinum 460 SDM mast work with a 2015 MAUI SAILS TRX 1 8.4 sail? Supposed to use a M.S. Race 100 K 460 SDM.

Sandman1221
2776 posts
29 Sep 2021 12:47AM
Thumbs Up

Mauisails went from a stiff top to a constant curve mast recently, would contact them. Also find out what the bend curve is on the North mast, and the carbon content, want at least 75% for a race sail, I think.

Mark _australia
WA, 22114 posts
29 Sep 2021 8:57AM
Thumbs Up

Isn't maui now gone?
The mast charts from back then show it as a 'barely works' match so it might be OK but it certainly not a straight swap with no noticeable difference.
Even if curve is right, dia can be off - so I say for anything with cams don't even bother unless you have access to different cams and/or want to try changing batten lengths if its necessary to get good rotation. ie: for a person who loves tinkering to try, not for a beginner to try.

Bertelo
9 posts
30 Sep 2021 12:35AM
Thumbs Up

Thanks Sandman and Mark. That was my take away also - The curve and diameter both might be issues.
I recently picked up a beautiful 2016 NORTH Warp / Fanatic Falcon 138 TE quiver . The sails were 6.3, 7.0 and 7.7 . I have been looking for a 8.4 WARP without success. There is an immaculate Maui Sails TRX1 available but the seller does not have the M.S. mast .

Separate Question : Will the WARP 6.3 be at all useful with the FALCON 138 ? I am around 90 kg and sail a windy / gusty inland lake that rarely builds up chop larger than 1/2 meter.

peterowensbabs
NSW, 448 posts
30 Sep 2021 6:45PM
Thumbs Up

"Will the WARP 6.3 be at all useful with the FALCON 138?" Eh... yes! and lots of fun!

The 138 is still blisteringly quick when fully lit with a (relatively) smaller sail. Its a big bit of kit but no slouch. Biggest issue is wind walking (but good technique will fix that. Nicko Prine has some good videos on "flying" a big slalom board).

It is also an option to use a smaller lighter rig in more marginal conditions or those days where the wind is due, but slow to build and to get out there with out a massive rig, keep the weight down and coax the board to go-just not as exhilarating.

Bertelo
9 posts
30 Sep 2021 11:14PM
Thumbs Up

Thanks Peter. I have seen a few of Nico's clips. He needs a pilots license !
On the mast question, I was able to contact Phil McGain :

To: phil.mcgain@mauisails.com
Subject: Mast Compatibility
Would a 2016 NORTH SAILS Platinum SDM 460 mast work OK with a 2015 TRX1, 8.4 ? Thanks,Robert
From: Phil McGain
Yes, they are a good mast. Best Regards, Phil McGainSynergy Sports Inc.

Since the TRX 1 is in such pristine condition, and nicely priced, I am tempted to give it a try.


Bertelo
9 posts
1 Oct 2021 9:33AM
Thumbs Up

" The 138 is still blisteringly quick " PETEROWENSBABS

The fellow I got the board from said it had 2 speeds :
VERY FAST and SCARY FAST.

BSN101
WA, 2256 posts
1 Oct 2021 1:18PM
Thumbs Up

Select to expand quote
Bertelo said..
Thanks Sandman and Mark. That was my take away also - The curve and diameter both might be issues.
I recently picked up a beautiful 2016 NORTH Warp / Fanatic Falcon 138 TE quiver . The sails were 6.3, 7.0 and 7.7 . I have been looking for a 8.4 WARP without success. There is an immaculate Maui Sails TRX1 available but the seller does not have the M.S. mast .

Separate Question : Will the WARP 6.3 be at all useful with the FALCON 138 ? I am around 90 kg and sail a windy / gusty inland lake that rarely builds up chop larger than 1/2 meter.



I'd think that 6.3 would be a bit small for that board size. At 90 kg and 6.3 conditions a smaller board will be the go.
no idea about compatibility, soz.

RichardG
WA, 3743 posts
1 Oct 2021 2:16PM
Thumbs Up

Select to expand quote
Bertelo said..
Thanks Peter. I have seen a few of Nico's clips. He needs a pilots license !
On the mast question, I was able to contact Phil McGain :

To: phil.mcgain@mauisails.com
Subject: Mast Compatibility
Would a 2016 NORTH SAILS Platinum SDM 460 mast work OK with a 2015 TRX1, 8.4 ? Thanks,Robert
From: Phil McGain
Yes, they are a good mast. Best Regards, Phil McGainSynergy Sports Inc.

Since the TRX 1 is in such pristine condition, and nicely priced, I am tempted to give it a try.




Maui Sails moved to constant curve at the year of 2015 so this probably makes even more sense. Please test and report your findings.
See: www.iwindsurf.com/forums/viewtopic.php?t=33633&sid=e91d467b2ddcec4d6e5bdaf242d0aa3b

ka43
NSW, 3063 posts
1 Oct 2021 7:41PM
Thumbs Up

A 6.3 on a Falcon 138 wont work. The 136 or 140 work great with a 8.4 and 7.7 but thats as small as you would want to go. The boards are awesome but at 85 wide a rig that small just doesnt work.

Bertelo
9 posts
1 Oct 2021 10:59PM
Thumbs Up

Thanks for the feedback and Cheers to all .

ADinis
62 posts
2 Oct 2021 5:19AM
Thumbs Up

I sail a lot, only this year, more than 20 times, starboard isonic 127L 85wide and 6.3m sail with 44 fin.
Also 9.4m sail and 127L and 44 fin works great!! Never had spinouts even when i'm overpowered.

if the wind pick up and have enough water level, i change to starboard 161 formula with 73 fin ;)

but believe with this 127L board and 44 fin i can sail from 5.7 sail to 9.4. Call me crazy but not liar



Subscribe
Reply

Forums > Windsurfing General


"Mast Compatibility" started by Bertelo