I have a 520 75% carbon mast. I need to cut about 2' off it. I imagine it will be a little bendier if I cut off the bottom.Cut off the top= stiffer Do I want the mast bendier or stiffer. Looking at the potty or Blokart picture seems to be very bendy.
Holy Dooly John, I don't believe it. As a special offer to save 5 seconds of your time with a hacksaw and lots of heartache later, I'll willingly swap one of my short masts for your 5.2!! Take a pick of a stiff one or bendy.
wokelliott said... Holy Dooly John, I don't believe it. As a special offer to save 5 seconds of your time with a hacksaw and lots of heartache later, I'll willingly swap one of my short masts for your 5.2!! Take a pick of a stiff one or bendy.
How is that new wing progressing?...w
The wing is on hold until I get another wing done for another guy. I'm kind of leaning toward the mini completion first. So far it's been a fun build.
what is the IMCS number of the mast. 15 is bendy ,27 is a stiffy,by trimming the top you would increase you number. my mini masts are around 27-30.for a 4.6m mast , the exception would be my little 3.2m mast for my 2.4-1.8m range of sails ( youll be needing some of those)
)
