Howdy... I 'popped' the seam above the knee on a 1yr+ old short arm Billabong 202 steamer today - the panel join was one of the un-stitched 'rubber weld' joins (it just popped open like a chip packet for about 12-15cm).

Hoping a Breezer can point me in the direction of someone who repairs wetties in Perth - pref North of the river.

Thanks in advance.

if all else fails.......superglue works!


fond memories of working at a big beachside hotel/resort in perth.

having to superglue a rather buxom young lass into a latexy catsuit thing.
her suit had torn itself down the seam next to the zipper when she tried doing it up.

she had to try and hold her boobs together so I could (in my most professional manner) glue the suit together without glueing myself to her boobs at the same time

we were both giggling like schoolkids at the time!

hope her hubby appreciated my efforts!

stephen.

wouldnt be surprised if I bragged about that particular job before, kinda hard to forget the good ones, and helps me forget the more common crappy stuff I had to put up with.

dental floss and contact adhesive if you are keen.

JAM wetsuit products (including Repairs and Alterations) in Greenwood.

9448 6584

Dropped off the wetty at 10:30am - ready by 4:00pm - $30 for two big seam splits... gotta be happy with that.

Cheers for the tip Cruzin!