Bladder issues

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
yeehaa
yeehaa
QLD
123 posts
QLD, 123 posts
13 Jan 2011 6:41pm
Heya all,

Finally got some wind today HORRAY!!!

My joys were short lived however, I was riding on my new toy that i've only used about 5 times, and the leading edge went soft

So I take him home, I've found a leak in the bladder with soapy water, it's not at a valve just on a straight run. It's a 2010 flexifoil hadlow pro (I bought second hand) and I give it a hard time generally, it's hit the deck heaps lately because I seem to be crashing out hard since I bought it I heard you can take the bladder out and glue it up or something, I don't want to have to send it away to get fixed, it'll cost too much and the forcast is good for this week.

Anyone gone through this before, any products on the market I can use? How do I get the bladder out and back in again? Any help would be helpfull

bingles
bingles
WA
363 posts
WA, 363 posts
13 Jan 2011 5:17pm
Glueless bike tube patches man - always carry some, i put 8 over a burst on my old boxer - its still holding!! Or there is that killer stuff tear aid - expensive though. Gee my ozone comes witha repair kit with all that shizzle already in it Hope that helps, i think dusta needs to get out on the water
TurtleHunter
TurtleHunter
WA
1675 posts
WA, 1675 posts
13 Jan 2011 6:06pm
never heard of that before
your local kiteshop will have plenty of patches or the hardware store will have bicycle tube patches. Most brands put a few patches in the bag so you can fix it and get back out. Have you checked the bag
Karve
Karve
VIC
197 posts
VIC, 197 posts
14 Jan 2011 8:54am
There should be some park adhesive patches in the bag (with the spare tubes, ties, and panel repair patches). If not then any kite store or decent bike shop will have them.

Just make sure that you clean the bladder first in the area that you want to stick the patch.
eppo
eppo
WA
9793 posts
WA, 9793 posts
14 Jan 2011 7:51am

Just do a youtube search as well.

Just make sure you tie a long string on one end as you pull it through (if taking the whole thing out), to pull back again. Use talc powder helps pull it back through as well. Pump slowly at first make sure no twists. Helps to fold in ends into themselves like a sock so they pop out when inflating (more needed on struts).

and for the guy saying you are too cheap to get it 'professionally' done (whatever that means), it's no harder than fixing an air mattress so good on ya for doing it yourself. If on valve then totally different story. That can be a pain!
SaveTheWhales
SaveTheWhales
WA
1913 posts
WA, 1913 posts
14 Jan 2011 9:42am
Secret title misread.. we're onto ya

External factors means denial

See your local midwife for help
dusta
dusta
WA
2940 posts
WA, 2940 posts
14 Jan 2011 1:11pm
eppo said...
and for the guy saying you are too cheap to get it 'professionally' done (whatever that means), it's no harder than fixing an air mattress so good on ya for doing it yourself. If on valve then totally different story. That can be a pain!


i merely mentioned that google was a free service , but my post got nuked
James
James
WA
549 posts
WA, 549 posts
14 Jan 2011 4:00pm
[b]dusta said.

i merely mentioned that google was a free service , but my post got nuked


I read your first post on this thread , I think I can remember you saying more than that. Pants on fire, dude ! !

yeehaa
yeehaa
QLD
123 posts
QLD, 123 posts
14 Jan 2011 8:07pm
Sweet as guys pulled the bladder out, stuck on a patch, put it back together. Couldn't be easier thanks guys.
Now i hope this cyclone patrols the coast a bit and brings some good wind
Please Register, or first...
Topics Subscribe Reply