NSW
432 posts
I've got my hands on a paddle clubbie board at least 10 feet long...has about a dozen hammer dings and 1 four inch ding on front end all on side of board you lay on...not wanting to use 2 -pak repair kits...coz I always get mix wrong...too much or too little hardener...Is there any 1 pak car or boat bog in shops ..not online...thanx..paddling 2 or 3 klms is so boring...sometimes it is actually fun..
NSW
432 posts
Bog was a common name for car repair body filler ...isnt it still. ?
WA
542 posts
Or buy west system epoxy with their dispensing pump system... no more getting the mixing wrong... Then get a small bag of Qcell and 410 microlight for fairing and you will be all set for doing good repairs.
NSW
432 posts
Thanx...almost bought a resin kit at Bunnings but bought marine putty. Small amount for $15 bort 2. The 12 or 15 hammer dents had each a horseshoe crack that were difficult to cover with putty . When dry looked like chewing gum..sanded back but not too much..still looked crap but did job without mess..flouro pressure paint has hid the crap look...In hindsight...should have used resin and 1 foot by 2 foot glass..poured some resin in each hole first ,then put resinned layer of glass over all holes for a uniform neat layer.
