Hi I have a leaky valve. I'm windy but that doesn't concern me, what does is the inflation valve on my 10m, it leaks! It leaks from where the male bit is inserted into the female bit. Do I just replace the valve or has anyone experimented with other dodgy solutions such as blue tack, plumbers tape or.......???? Please help

On another note love the beard sir Rowdy and a fun vid.

Carefully tensioned zip tie will do the job for a while.
I made an oversized plug and that worked ok too.
Otherwise new stick on one way valve.

And don't leave your inflate plug in when finished kiting for the day. Take it out each time and allow the female part to return to normal size

and of course regular pelvic floor exercises.

Yep had this problem, simple fix - grab some electrical tape, wrap the male bit a few times ; no more leak

The simple solution.
Cut the inflate nozzle of your kite pump to where the end diameter just fits into your valve cap.
Boil up the inflate cap then insert the pump nozzle right to the top. This will stretch the cap to a wider profile. Dunk the cap & valve stem into cold water & allow to cool. Cap will now seal tight in the valve.
Remove the inflate valve stopper EVERY time you deflate your kite. It's a no brainier - once you know!

Hi,

Kite valves are generally injection moulded polyurethane which has a certain memory of their original shape. Stick it in boiling water for ten minutes and it will shrink back to original size. Easy.

Rich