^^^
no screw driver fins ?? have you a photo of the offending items? do you mean hex drive heads ? as in future fins??

Try Sunday Surf, Henley, south oz. grabbed a new fin the other day after hitting a sandbar. Ph 0450873337.

Frauso said..
Noosa adventure sports in QLD have them on there online website .

If you look at their site, you'll see they're "sold out"..

www.kitesurfaustralia.com.au/collections/kite/fins

Also ment to mention if you want to convert your quick release fins to 2 screw mount i have also done this.
I ground off pins and drilled into orange plastic maybe 10mm deep where pins were and slightly smaller dia to stainless screws i used.
Then drilled pin wholes through board which are part way though and through orange deck plate.
Make board whole touch bigger and smear 5 min araldite around whole to make sure whole were screws will run though can't take any water
into board core
then countersink deck plate to take new screws.
screw new screws into fins and onto board.
screws seem to cut there thread into fins easy and makes for rock solid fins which look almost the same.
my board has been like this for 3 years now and has been worth to effort for fin strength .