SA
18 posts
Hey am just after some help from people that may be able to help.
I just bought a North Gambler and some Ronix Divide boots, however when I go to put the boots and place and screw them in, the screw doesn't go all the way. Am I doing something stupidly wrong here?
WA
231 posts
Yeah mate your ronix boots come with imperial screws. You need to ditch them and get 20mm long, metric 6mm screws. I hope you didnt try to do them up too tight otherwise you might find you have a bit of thread damage. Make sure you get stainless steel bolts as say zinc bolts from bunnings will start to corrode after a week or so and might also damage your inserts.
SA
18 posts
Ok, cool thanks heaps for that!
WA
8407 posts
Also check your screws arnt bottoming as the inserts are too shallow for the screws, had this with some Dakine warlocks on north board, either swap or put a stainless split washer, this also stops the screws coming loose
