Anywho, this weekend i started the rocker table.

Here are a couple of pics of the progression.

Here i am setting up the side rails.


Side rails are screwed on.


Laying out the cross bars.


Two bars set up on their supports.


Up to now i have almost completed the bars, i ran out of all thread and bolts.
I will Finnish it next weekend and then pull it apart for finishing and painting. Not sure what table top to use yet, ill have look into that a bit more to be able to get it to do what im planning.

Peter

Yep that's it, adjustable rocker table to be able to set the rocker , or lack of it when laying up a board

It won't work, rod 4 is 2mm out.

Peterdj,
Just a quick word of encouragement, please continue to update the thread with your progress. Would be good to see the whole process from start to finish.
It's a good feeling to ride a board you have made yourself. Good luck