Forums > Kitesurfing General

Would it be hard to convert Core Sensor 2s Pro bar into low Vee split?

Reply
Created by Swavek > 9 months ago, 26 Oct 2018
Swavek
WA, 393 posts
26 Oct 2018 11:42AM
Thumbs Up

Atracted to ceramic bearing for untwisting lines, but high Vee
Splice my own lines , could make some bits of lines myself.

ActionSportsWA
WA, 950 posts
26 Oct 2018 4:36PM
Thumbs Up

The whole core depower system is about 4.5m before the front lines start.
This makes it pretty difficult to change as you would need to not only create a differnt length depower/ power line set up (3 differnt liines of different length) but also adjust and create longer front lines.
Better off buying something that can already be adjusted like the North/Duotone click bar, covered centre line, internal mechanism, metered clicks, easy to adjust, set the split wherever you like and ceramic swivel.
Can always come in and grab a demo to try!

Toddy ASWA

Swavek
WA, 393 posts
26 Oct 2018 9:57PM
Thumbs Up

Thanks Toddy, never had a chance to have a close look at Core bar, sounds like a headache to try to convert to.low Vee.

Is the swivel on North as good as Core system? Using Wainman bar for all my kites - ceramic swivel but it does not work well after a year or so.

SaveTheWhales
WA, 1869 posts
29 Oct 2018 2:14AM
Thumbs Up

Go the 60cm bar... I'll show you a little mod to make the centre lines last longer before you use it.

SaveTheWhales
WA, 1869 posts
29 Oct 2018 10:13AM
Thumbs Up

Select to expand quote
SaveTheWhales said..
Go the 60cm bar... I'll show you a little mod to make the centre lines last longer before you use it.


The Depower lines I meant



Subscribe
Reply

Forums > Kitesurfing General


"Would it be hard to convert Core Sensor 2s Pro bar into low Vee split?" started by Swavek