SA
449 posts
Can anyone explain how to remove the plastic cover from a 2008 Liquid force LE valve?
Valve is leaking it has pulled away from the bladder. I will use a U Stick valve to get it up and going if I can remove this item from the faulty valve.
Thanks in Advance.
WA
571 posts
Cup of boiling hot water, leave it about 10 seconds or so the glue softens then gently pull. Might have to repeat a few times but it works. The U sticks replacements work fine, have done the same method with dump valve. Don't need to take LE right out, just pull enough through the zipper. Make sure when putting on new one there are no wripples/creases, best to do on flat surface.
Good luck
