Hi - any one got any tricks to get a single knot out of a line without destroying it?

Soak it in hot water for 10 minutes first.
Then work on the knot using your teeth (not too hard)
A little patience and you should get it.
DO NOT USE ANY METAL IMPLEMENT!!!

Jason

soak it in fish oil,put it in the freezer over night,then dig a hole at the foot of a large female oak tree(must be female)cover in wet news paper and leave it there for a week.
knot will come right out easy
if that dosent work,tie a knot in your other 3 lines so all are even lenghts.
sorry couldnt help myself.
good luck

Chew 3-5 mins fixed

After about the 3rd time it happened to me, I realised there was a pattern.

Knot always in the last meter or so of the line.
Rushing to get set-up and on the water, didn't see it. Then flew a session on it and got it nice and tight.

Now I check for knots on the last 2m of each line on set up as part of my final lines/connectors/bridle double check before launch. Never had another knot and it saves 20mins of swearing, chewing, picking etc. to get them out.