ripped kite.. Repair??

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
farNT
farNT
QLD
89 posts
QLD, 89 posts
28 Jul 2014 6:08pm
hi all
Slammed my 15m LF envy today and nearly tore it in half, half way between the struts from leading edge right through trailing edge.yeah not happy ..What i want to know is it reparable [fairly straight rip] and if so anyone know of any good quick repairmen .Darwin would be easiest for me but Cairns or Townsvill would be ok as im in Gove so has to be posted anyway...
thanks in avance
Ragzilla
Ragzilla
VIC
240 posts
VIC, 240 posts
28 Jul 2014 9:31pm
Had 2 repairs from Moti Levy Kite Repairs.

He does quick turn around.

3 year warranty on repairs
And
Has a free courier to get your kite back to you.

Basicly, fill in the repair form, send it off, wait a few days and it's back.
Based in NSW, but bestin the business in my opinion.

I do not work for Moti Levy either.


windreams
windreams
QLD
258 posts
QLD, 258 posts
28 Jul 2014 9:40pm
www.kiterepair.com.au/

Agree with Ragzilla...
Macster
Macster
VIC
276 posts
VIC, 276 posts
28 Jul 2014 10:58pm
windreams said..
www.kiterepair.com.au/

Agree with Ragzilla...


Not so convinced about Moti. His outfit damaged a valve on a kite I sent to him to repair and then said it was impossible that he broke it and that it must have been me that did it. He did however offer to fix it for another $100 if I sent it back to him... If he was nearby I would have gone and seen him face to face, but pointless arguing over the phone.


C4m
C4m
SA
33 posts
C4m C4m
SA, 33 posts
28 Jul 2014 10:30pm
I got my kite repaired in Darwin by the sail repair guys out near Dina beach road. LE split on a rebel, very good job and we'll priced. Robbie would be able to tell you the name of the place.
makntracks
makntracks
QLD
132 posts
QLD, 132 posts
28 Jul 2014 11:29pm
Sail repairer at Nautical supplies in Darwin. Did my 15m envy when it exploded sitting on the beach..
have had a few repairs done there and he does all the Darwin crews kites. If you only get to Darwin on weekends i can drop it off for you in business hours.
Rails
Rails
QLD
1371 posts
QLD, 1371 posts
29 Jul 2014 7:15am
Pretty easy to do yourself
gunny11
gunny11
VIC
51 posts
VIC, 51 posts
29 Jul 2014 8:29am
Add repair tape on both sides... sew around the edges of the tape and your good to go.
farNT
farNT
QLD
89 posts
QLD, 89 posts
29 Jul 2014 9:43am
Cheers Guys
Will send it to darwin as old mate is flying back there in a a coupla days and lives across the road Not long now ....
farNT
farNT
QLD
89 posts
QLD, 89 posts
29 Jul 2014 9:46am
gunny11 said..
Add repair tape on both sides... sew around the edges of the tape and your good to go.



Yeah something a bit smaller maybe but looks a bit to much for me to tackle for a first repair
thanks anyway
farNT
farNT
QLD
89 posts
QLD, 89 posts
29 Jul 2014 9:51am
makntracks said..
Sail repairer at Nautical supplies in Darwin. Did my 15m envy when it exploded sitting on the beach..
have had a few repairs done there and he does all the Darwin crews kites. If you only get to Darwin on weekends i can drop it off for you in business hours.



i take it this is the same place as C4M,s above if so all goodand thanks
INTHELOOP
INTHELOOP
QLD
1855 posts
QLD, 1855 posts
29 Jul 2014 12:47pm
hey guys,always happy to quote on repair, one day turn around and top quality repairs. Quickly fill out form and get quote and u be back out in the water in no time.www.intheloopkiteboarding.com/repairs/australia-kite-repairs)
C4m
C4m
SA
33 posts
C4m C4m
SA, 33 posts
29 Jul 2014 1:28pm
that is the one.
Eaglelad
Eaglelad
VIC
119 posts
VIC, 119 posts
29 Jul 2014 2:27pm
Macster said..

windreams said..
www.kiterepair.com.au/

Agree with Ragzilla...



Not so convinced about Moti. His outfit damaged a valve on a kite I sent to him to repair and then said it was impossible that he broke it and that it must have been me that did it. He did however offer to fix it for another $100 if I sent it back to him... If he was nearby I would have gone and seen him face to face, but pointless arguing over the phone.




Just to add balance to the thread for future reference I had a similar experience with Moti.
Mine wasn't a valve, he simply fixed a L.E tear but left the smaller tear next to it. Claimed it was a nick which turned into a tear when I pumped it up (Can happen) except I didn't pump it up because the tear was so obvious when I got it back.
His website says he tests all kites and keeps a picture before sending back but when i asked for the picture he said his phone had died and it was unavailable.

Long story short he wouldn't fix it without getting paid for another repair and it was a solid month before I was using that kite again..
No hate or malice just balancing a thread which will get googled by the next guy who tears his kite.
farNT
farNT
QLD
89 posts
QLD, 89 posts
29 Jul 2014 2:40pm
INTHELOOP said..
hey guys,always happy to quote on repair, one day turn around and top quality repairs. Quickly fill out form and get quote and u be back out in the water in no time.www.intheloopkiteboarding.com/repairs/australia-kite-repairs)



cheers marvin but have sent it to darwin as above..By the way the vanhunks bucca is working a treat for the winds up here just starting to boost and am addicted, the only thing is trying to get it right over when the wind is up around 20 knots and using my 15m i seem to catch my calf on the water a bit but thats probably just me, or maybe i might be a bit overpowered with a big board..other than that all good
farNT
farNT
QLD
89 posts
QLD, 89 posts
29 Jul 2014 2:48pm
makntracks said..
Sail repairer at Nautical supplies in Darwin. Did my 15m envy when it exploded sitting on the beach..
have had a few repairs done there and he does all the Darwin crews kites. If you only get to Darwin on weekends i can drop it off for you in business hours.



exploded sitting on the beach ??? WTF maybe an old mine from WW2 lol
Puetz
Puetz
NT
2186 posts
NT, 2186 posts
29 Jul 2014 3:11pm
... hey farNT, just wondering, where are you kiting in Gove?

Robbie
farNT
farNT
QLD
89 posts
QLD, 89 posts
29 Jul 2014 9:26pm
Puetz said..
... hey farNT, just wondering, where are you kiting in Gove?

Robbie


East woody in the wet season and the spit in the dry either the bay side from the tip of the spit to the cargo warf or from the cargo warf to the boat ramp pretty much onshore an about 1.5 m deep all the way or cape Arnhem wind ATM bout 20 knots every day loving it
windreams
windreams
QLD
258 posts
QLD, 258 posts
29 Jul 2014 9:46pm
Eaglelad said..


Macster said..



windreams said..
www.kiterepair.com.au/

Agree with Ragzilla...





Not so convinced about Moti. His outfit damaged a valve on a kite I sent to him to repair and then said it was impossible that he broke it and that it must have been me that did it. He did however offer to fix it for another $100 if I sent it back to him... If he was nearby I would have gone and seen him face to face, but pointless arguing over the phone.





Just to add balance to the thread for future reference I had a similar experience with Moti.
Mine wasn't a valve, he simply fixed a L.E tear but left the smaller tear next to it. Claimed it was a nick which turned into a tear when I pumped it up (Can happen) except I didn't pump it up because the tear was so obvious when I got it back.
His website says he tests all kites and keeps a picture before sending back but when i asked for the picture he said his phone had died and it was unavailable.

Long story short he wouldn't fix it without getting paid for another repair and it was a solid month before I was using that kite again..
No hate or malice just balancing a thread which will get googled by the next guy who tears his kite.



Thanks for the feedback guys, always good to hear about other experiences... negative and positive!
LostDog
LostDog
WA
445 posts
WA, 445 posts
30 Jul 2014 8:35am
Eaglelad said..

Macster said..


windreams said..
www.kiterepair.com.au/

Agree with Ragzilla...




Not so convinced about Moti. His outfit damaged a valve on a kite I sent to him to repair and then said it was impossible that he broke it and that it must have been me that did it. He did however offer to fix it for another $100 if I sent it back to him... If he was nearby I would have gone and seen him face to face, but pointless arguing over the phone.





Just to add balance to the thread for future reference I had a similar experience with Moti.
Mine wasn't a valve, he simply fixed a L.E tear but left the smaller tear next to it. Claimed it was a nick which turned into a tear when I pumped it up (Can happen) except I didn't pump it up because the tear was so obvious when I got it back.
His website says he tests all kites and keeps a picture before sending back but when i asked for the picture he said his phone had died and it was unavailable.

Long story short he wouldn't fix it without getting paid for another repair and it was a solid month before I was using that kite again..
No hate or malice just balancing a thread which will get googled by the next guy who tears his kite.


Disclaimer - don't know Moti from a bar of soap.

The thing about "balance" on an internet forum is similar to elsewhere in our society. Those that had bad experience are the ones who always shout first and shout the loudest. I wonder how many good experiences people have had with Moti that are not commenting on here to give true indication of his customer satisfaction?? So those with bad experiences (and all businesses have that) think a balance is to have a one-to-one ratio reflected.

It would be interesting to hear his (or hers) side of the story, but I'm sure he's too busy servicing his 99% of happy customers.
bigkiterida
bigkiterida
NSW
6 posts
NSW, 6 posts
24 Aug 2014 1:34pm
There's another guy in tweed heads that does kite repairs. Search for Deano's Kite Repair in google.

I've had a few repairs done with him recently and he does a good job and is a bit cheaper than the other guys in the area.

Taking another kite up to him today.
Please Register, or first...
Topics Subscribe Reply