Learning to kite on surfboard

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
bm
bm
VIC
80 posts
bm bm
VIC, 80 posts
28 Jan 2012 3:06pm
Just wondering whether it is easier to learn with or without straps?
stuntnaz
stuntnaz
NSW
540 posts
NSW, 540 posts
28 Jan 2012 3:15pm
I would say strapped .If your strapless when your learning and you have your kite to high it will just lift you off your board .Spend more time body dragging than riding .
bm
bm
VIC
80 posts
bm bm
VIC, 80 posts
28 Jan 2012 3:47pm
Thanks
Livit
Livit
WA
542 posts
WA, 542 posts
28 Jan 2012 1:12pm
I'd say the other way around.... Especially if you get started in the flat prior to trying in the waves....
Strapless will allow you to get the perfect placement and getting your bearings. Also way easier to learn about transitions and gybing.

Paradox
Paradox
QLD
1326 posts
QLD, 1326 posts
28 Jan 2012 5:35pm
Go a bet each way. Just use a front strap so you can move your back foot around as much as you want but still retain an attachment...

bm
bm
VIC
80 posts
bm bm
VIC, 80 posts
29 Jan 2012 8:40am
Thanks for the advice. This is the great thing about kitesurfing, so many options.
bobajob
bobajob
QLD
1535 posts
QLD, 1535 posts
29 Jan 2012 12:05pm
If you go with one strap, when you go out and get a bit of air the board tends to skew a bit. I found that moving my back foot up closer to the front strapped in foot made the landings more managable. I'm not talking massive airs, just the ones you can't help doing.

It all took me a bit but, with both straps on turning and changing feet and riding toeside isn't that much of a hassle.

Good luck, it can be a learning curve but thats the fun of it all
suniboy21
suniboy21
VIC
1090 posts
VIC, 1090 posts
30 Jan 2012 10:17pm
Is it possible to learn on a typical surfboard?
If i was to purchase a cheap second hand surfboard, what size would i be looking for (85-90kg)?
Whats Mods would be needed for it to cut upwind?
blueprint
blueprint
WA
321 posts
WA, 321 posts
30 Jan 2012 10:38pm
suniboy21 said...

Is it possible to learn on a typical surfboard?
If i was to purchase a cheap second hand surfboard, what size would i be looking for (85-90kg)?
Whats Mods would be needed for it to cut upwind?


Yes basically any surfboard will do at 85-90 kg I'd start at something 5'10" to 6', about 18.5" wide and with a bit of width in the tail (go for a square/swallow shaped tail or a round tail with a bit of width). Other thing to look for is a board with a bit flatter rocker. If you can find this (it's not that uncommon) than basically no mods are required, if you want straps then you'll need to add plugs and while you are at it I'd add a patch of glass under your feet otherwise just go ride it.
Please Register, or first...
Topics Subscribe Reply