7 posts
The Bar for my five liner Vegas (9 metre 2007); has been set up with all three of the lines, below the Depower unit, going through the one central hole. They are a pretty tight fit.
It makes me wonder if the bar would work better if the centre hole was used only for the thick (grey) line which goes to the centre of the depower unit. That would leave the two other holes (20mm on either side of centre) for the thin grey line which goes between the depower unit and the emergency release on the one side; and the fifth line (red) going through the other.
What do you reckon?
Best wishes
Birdmanpete
QLD
561 posts
i got the same kite n set up
i just dip it into the water asap to clean it
as far as moving the lines ,to 3 different holes in the bar.
id say as they twist , sheeting the kite could be restricted .
great kite hey
Thankyou dafunk. Yes I am very impressed with North and this model. Super gear.
