Has anyone out there modified (e.g. bored out) the bar penetration for the de-power line on their '08 Rev Bar? I've just purchased the kite (7m) and find the bar is problematic because of the tight fit and lack of a chamfer on the bar top side. My de-power line showed clear signs of wear after only the 2nd session. It's not just the wear that concerns me but also the slow speed at which the de-power line(s) move through the bar because of friction. On an aggressive wave session where you need to move the bar in and out repeatedly this will create problems. Anyone done a field mod they can share with me? IÕve seen guys wax their de-power line to reduce wear. Anyone doing that? What wax are you using?

Cheers Mike

try a search, theres plenty of info on rev 08 bar mods.
cheers

i have just replaced the spectra line thou the middle of the bar mine snapped out in a strong southly 25+ gave me the ****s!! was able to fly it back to base thatnks to the black stop ball thing , seem the older stuff swells and stops the bar moving freely after a while , 17$ will fix the prob, anyway thought i would just do some reno's on the bar and bring it back to A1 spec again , ill see how it goes this afternoon , blow baby blow!!