This stirrup hand pump is great. It's a bravo KITE ALURED. (there are different models) Pumps on both up and down strokes until you get to around 4psi; then automatically switches over to pump on the down stroke only. Makes it super easy and quick to hand pump your kites and get decent pressure in them effortlessly. I've had all forms of electric and cordless, and for ease of use and cost this is the best yet. I purchased it online for $37 delivered. I think some brands of new kites supply this pump with their own label attached. It has smooth handles, and a metal shaft. Decent pressure gauge, all the pump attachments, and a nice long bungee rope to clip to kite while pumping. Apparently built to be more resistant to sand contamination. Higher quality and REDuced effort. Time will tell re durability!

Looks identical to the 2014 North pumps.....

Not sure that is meant to happen, but one of my North pumps fails on the up stroke around 4 psi....

gokid said..

Looks like a nice pump,is it made from soft plastic or hard brittle plastic

I need a new pump

Hmmm. Not sure. Do I have to bite it to test?

I just went off gauge, but just read blurb.... It cuts over at 5.8 psi
Here is a copy of blurb

Automatic Switch From Double Action Into Single Action Over 5.8 Psi In Order To Reduce The Effort At Higher Pressures
Anti-Sand Inlet
Pressure Up To 11.6 Psi
It Inflates And Deflates
Suitable For Inflatable Boats


I think cabrinha and a few other brands supply these with their 2014 kites in different colours. Coupled with an oversize inflation valve, they make pumping up easy as. You can really squeeze those last few pumps in. Do you guys think the new 2014 north pump system is better? Although did they change to the oversize valve at the same time, so you can't really compare with last years pump. I'm wondering if the cut over to single action thing is more suitable with kites with the large inflation valve. Eg ozone cabrinha north. The old valve nipple and ball thing requires more force. This pump feels quicker and easier than my stock standard ozone

no fluoro hose or nozzle, doesn't suit me???

I've heard Liquid Force now uses this Bravo pump

pearl said..

gokid said..

Looks like a nice pump,is it made from soft plastic or hard brittle plastic

I need a new pump

Hmmm. Not sure. Do I have to bite it to test?

I just went off gauge, but just read blurb.... It cuts over at 5.8 psi
Here is a copy of blurb

Automatic Switch From Double Action Into Single Action Over 5.8 Psi In Order To Reduce The Effort At Higher Pressures
Anti-Sand Inlet
Pressure Up To 11.6 Psi
It Inflates And Deflates
Suitable For Inflatable Boats


I think cabrinha and a few other brands supply these with their 2014 kites in different colours. Coupled with an oversize inflation valve, they make pumping up easy as. You can really squeeze those last few pumps in. Do you guys think the new 2014 north pump system is better? Although did they change to the oversize valve at the same time, so you can't really compare with last years pump. I'm wondering if the cut over to single action thing is more suitable with kites with the large inflation valve. Eg ozone cabrinha north. The old valve nipple and ball thing requires more force. This pump feels quicker and easier than my stock standard ozone

I have had 2 pumps and they both cracked just below the handle due to being made of hard brittle plastic,1 was cracked when I lent it to someone and the other cracked whilst in my bag

Come to think of it we are nearly there now if we turn a normal pump upside down a foot plate mounted to the handel then a bolt on handel on the bottom of the pump for the extension lets see what you guys come up with .

I can seem to find anywhere in Australia that stocks these, couple on Ebay.
Where did you get this one from, i'm thinking about trying it as my 2012 Cabrinha pump decided to stop working.

Seemed like a good deal, free shipping from UK and reasonably priced.
Will give it a flogging and see how it goes.