Anchor rope

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Sunseeker39
Sunseeker39
WA
71 posts
WA, 71 posts
31 Aug 2015 9:43pm
Hi all,
I need new anchor rope for my 40 ft , 8 ton yacht.
I would like to have line that will have a reasonable safety margin.
What diameter silver rope would everyone recommend.
cheers Craig
MorningBird
MorningBird
NSW
2711 posts
NSW, 2711 posts
1 Sep 2015 1:55am
Silver rope floats so is not the best material for anchor rode. I had it on MB and woke up one morning with it wrapped around the keel, rudder and prop. I had anchored in strong winds and had lots out. The wind died overnight and the boat drifted in circles around the floating rope. In the morning I noticed all the other boats were facing the opposite direction to me. If I hadn't and started the engine in preparation to weigh anchor, or if the wind had blown up again, I would have been in very big trouble.
Use nylon.
Charriot
Charriot
QLD
880 posts
QLD, 880 posts
1 Sep 2015 4:04am




Nylon is twice as strong, would not touch silver
Personalty, I would use chain, for main, 10 mm for second anchor.
/ used to have 12 mm nylon / 100 metres....its bulky, hard to handle / store
Charriot
Charriot
QLD
880 posts
QLD, 880 posts
1 Sep 2015 4:15am



this is the nylon rope table, prev. was polyester
Ramona
Ramona
NSW
7756 posts
NSW, 7756 posts
1 Sep 2015 7:46am
rumblefish said..
I like to use plaited polyester because it doesn't float like silver, doesn't shrink and get hard like nylon and it has good abrasion resistance.

I have sold and used this rope with success in the past, plus it goes through winches well and is beautiful on the hands
http://www.deckhardware.com.au/-products/liros_squareline_pes_18mm


That would be my no cost choice too. I actually use 14mm double braid yacht polyester because I had heaps laying about. Lays nicely in the anchor locker and is reasonable good on the hands.
rumblefish
rumblefish
TAS
824 posts
TAS, 824 posts
1 Sep 2015 9:15am
Ahh, don't use braided rope for anchoring or mooring is possible!!

Each strand in braided rope is at 45deg to the rope, meaning it ribs and goes fuzzy (wears) very quickly!!
Where as a braided rope has all the strands in line with the rope so it doesn't chafe nearly as much.
Yara
Yara
NSW
1322 posts
NSW, 1322 posts
1 Sep 2015 9:52am
rumblefish said...
Ahh, don't use braided rope for anchoring or mooring is possible!!

Each strand in braided rope is at 45deg to the rope, meaning it ribs and goes fuzzy (wears) very quickly!!
Where as a braided rope has all the strands in line with the rope so it doesn't chafe nearly as much.


Think you mean don't use plaited rope.
rumblefish
rumblefish
TAS
824 posts
TAS, 824 posts
1 Sep 2015 10:29am
oops, that's what happens when you type a post in 4 sections at work!!

Don't use braided rope (double braid), use plaited rope (3 strand, 8-plait, square rope)
Ramona
Ramona
NSW
7756 posts
NSW, 7756 posts
1 Sep 2015 6:01pm
rumblefish said..
Ahh, don't use braided rope for anchoring or mooring is possible!!

Each strand in braided rope is at 45deg to the rope, meaning it ribs and goes fuzzy (wears) very quickly!!
Where as a braided rope has all the strands in line with the rope so it doesn't chafe nearly as much.


This braided rope is what I used regularly for more than 20 years on my fishing vessel. I'm expecting another 20 years from it.

I was surprised to see yacht braid on flash boats moorings off the CYC though.
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
1 Sep 2015 9:49pm

I have 50 m of Kinnears 18mm three strand after 50 m of 8 mm short link chain. The line has a 1 m length of nylon reinforced plastic hose which can slide along it to be placed at the bow roller and fixed in place on the rode with light lashing.

It is easy on the hands and it is what I had so I used it. The spare Danforth anchor has 15 m of chain and about 100 m of half inch braided line. I think I am reasonably covered for my little Lotus.
Please Register, or first...
Topics Subscribe Reply