Iron Cove Bridge Clearance

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
keensailor
keensailor
NSW
702 posts
NSW, 702 posts
14 Dec 2015 2:50pm
Was wondering whether anyone had first hand experience in going under the Iron Cove bridge at Drummoyne and picking people up from the public jetty off King George Park (south side).

I spoke to Maritime and they said at high tide it is 12.3 metres clearance. Specs of my Northshore 27 say mast height is 10.36 metres.
Sounds a bit close if you consider the base of the mast might 2 metres from water level (deck mounted).
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
14 Dec 2015 1:58pm
navionics says its 10m. looks low. i probably wouldnt do it. Im gonna carry my laser around this xmas when going under bridges so im going to first hand get the heights to the mm.
andy59
andy59
QLD
1156 posts
QLD, 1156 posts
14 Dec 2015 2:30pm
Sectorsteve said..
navionics says its 10m. looks low. i probably wouldnt do it. Im gonna carry my laser around this xmas when going under bridges so im going to first hand get the heights to the mm.


That's clever. Is it a specialised expensive type of laser or something that might be worth buying just for the boat?
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
14 Dec 2015 2:50pm
yeah i use em for my job measuring up houses, but just realised that i can use it for bridges and measuring my own mast , which im gonna do on thur evening. its easier to do at night so you can see the red dot. Based on what some people said here on the forum im gonna play it real safe and measure the bridges im going under later in the week, in the dinghy before i take the yacht through. This particular laser has a range of 30 metres and is $220. swiss technology and very good. Its from sydney tools/vek tools. You can get some sonar ones that are very cheap but i wouldnt bother with them. Bunnings have some too - makita etc. The real good ones are at least $200 i think. Probably wouldnt buy one if it werent for my job, but i think its going to be handy this time up the hawksbury even anchoring. You know at night when you cant see nothing and you dont know how close you might be to another boat or rocks etc. (i dont have instruments)
keensailor
keensailor
NSW
702 posts
NSW, 702 posts
14 Dec 2015 9:04pm
Hi Steve
Is one of the bridges you are going to measure the Iron Cove bridge :)
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
14 Dec 2015 8:56pm
hey bro seriously, im a the boat the next few days, right near there. If ive got time, ill do it. need to do a lil sea trial aye :)
Toph
Toph
WA
1890 posts
WA, 1890 posts
14 Dec 2015 8:13pm
It will be worth finding out what the actual clearance is. Is it 10m or 12 metres? I don't know what the tide are like in that area, but don't forget that bridge clearance heights are clearances above HAT (Highest Astronomical Tide).. In other words, in normal tidal conditions (no flooding for example), it's worse case scenario.
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
14 Dec 2015 10:14pm
If you approach the bridge quite slowly and when just going under it your wind bird, tri light and VHF ariel fall on the deck, you will know that your mast just clears the bridge.
Chris 249
Chris 249
NSW
3585 posts
NSW, 3585 posts
14 Dec 2015 11:22pm
I've forgotten the actual measurement, but on a 28'er with an 11m (if I recall correctly) mast we needed less than half tide, if I recall correctly. I thought it was less than 12m.

I used to sail at Dobroyd Aquatic Club, one of the friendliest clubs around. Years ago we were sitting having a post-race chat when someone on a Catalina 42 or something tried to get under the bridge and failed completely. No one could work out why they ever thought they could possibly make it at any state of the tide. I'm just glad I wasn't under the mast as it fell.

Re the jetty- is the shore deep enough there? At the sailing club jetty I don't think you can ever get underneath the bridge with your mast AND get alongside the jetty - if the tide is high enough for one it's too low for the other. I think the jetty at the south-western end is similar.
keensailor
keensailor
NSW
702 posts
NSW, 702 posts
15 Dec 2015 5:30am
Sectorsteve said...
hey bro seriously, im a the boat the next few days, right near there. If ive got time, ill do it. need to do a lil sea trial aye :)



Ripper mate
keensailor
keensailor
NSW
702 posts
NSW, 702 posts
15 Dec 2015 5:33am
cisco said...
If you approach the bridge quite slowly and when just going under it your wind bird, tri light and VHF ariel fall on the deck, you will know that your mast just clears the bridge.



Hehe..yeah, don't think I would be trying that. That bloody Hella anchor light cost a fortune. Literally. ;)
keensailor
keensailor
NSW
702 posts
NSW, 702 posts
15 Dec 2015 5:34am
Chris 249 said...
I've forgotten the actual measurement, but on a 28'er with an 11m (if I recall correctly) mast we needed less than half tide, if I recall correctly. I thought it was less than 12m.

I used to sail at Dobroyd Aquatic Club, one of the friendliest clubs around. Years ago we were sitting having a post-race chat when someone on a Catalina 42 or something tried to get under the bridge and failed completely. No one could work out why they ever thought they could possibly make it at any state of the tide. I'm just glad I wasn't under the mast as it fell.

Re the jetty- is the shore deep enough there? At the sailing club jetty I don't think you can ever get underneath the bridge with your mast AND get alongside the jetty - if the tide is high enough for one it's too low for the other. I think the jetty at the south-western end is similar.



Yeah, see what you mean. Might have to brave the jetty at the Drummoyne sailing club when picking people up over Christmas holidays.
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
15 Dec 2015 7:44am
Its not really in your hood but northwood ferry jetty is 1 i use to pick up. Only has about 2 ferries a day. theres a jetty north side city side of iron cove bridge. Also balmain?? Based on what chris said with his first hand experience and noting depth/tide i reckon it would be stressful. im going to boat now to so some work so ill do a little detour on my cockatoo is circuit, drop anchor and measure in dinghy. 12m from maritime and 10 m navionics. ..quite a difference.
Planeray
Planeray
NSW
221 posts
NSW, 221 posts
15 Dec 2015 12:23pm
The dock at Balmain Sailing Club now has a part of their dock open to the public (council kicked in some of the funds). It's the new part with a couple of pens in it (not the older looking wooden ramp part). Water St, Birchgrove is the closest street.
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
16 Dec 2015 8:01pm
Iam sorry keen...my boat jobs acounted for 12 hours plus weather and i just didnt get to leave the moorong.
keensailor
keensailor
NSW
702 posts
NSW, 702 posts
16 Dec 2015 9:12pm
Sectorsteve said..
Iam sorry keen...my boat jobs acounted for 12 hours plus weather and i just didnt get to leave the moorong.


no worries, I don't think it sounds a very good option reading some of the other posts ie the depth of water at the jetty
thx anyways
sirgallivant
sirgallivant
NSW
1531 posts
NSW, 1531 posts
17 Dec 2015 12:38am
Drummoyne SC is an option but! as it is very shallow at low tides, be careful! On Tuesday night there was an Endevour 26 tied up there at the lowes low tide.

The other two options are the Woolwich Marina which has a public jetty but it is a bit of a lee shore in strong southerly, south easterly winds.
The second one is on the Birchgrove side at the end of King street next to the swimming pool.
It is the best spot around by far. The jetty is the same type as at King George park (Callan park).

Please Register, or first...
Topics Subscribe Reply