Having a look at my TriFli the out riggers should be able to be made by a good marine engineer, about 10 years ago I has some boat rear steps made from tubing.
If your a DIY sort Stainless tube is quite common from specialist steel supplies, if you need it bent see your local car exhaust guy.

Thanks Gizmo pipe and bending budget price is currently over $450

Will try epoxy and effort as a means of under investing in the new toy.

Are the standard 1.5 inch material outrigger supports up to the task as many stress cracks are apparent and 1 rear socket was holed on purchase.

Cut an inspection inbetween the sockets to repair internally the damage.

Is yours a fully battened main or is the model I have with a sock over a two piece aluminium mast the standard.

Zeus2