I've had about 5 years of grief with these water bladders ? I'm finding they just seem to fail and fill my interior under berth areas in water ? I've been using 4 of there tanks all isolated but plumbed in . I am finding that the 38 mm outlets are always seeming to leak? I've tried a small amount of Vaseline , and even Waterproof Sikafkex . The outlets I have sitting over a 50 mm cutout foam cushion - but feel the outlet on the middle doesn't suit the curve of my hull ( or most hull profiles )very well - this seems to put a lot of pressure on the connection which is reliant on a very weak thread ( only PVC). It also seems susceptible to cross threading - and easily over tightened to then fail.
After 1 completely split at a seam , and sick of replacing with the same - I've decided to try ones from ALi express - about $30 each for 110 litres . A much cheaper option than Plastimo.
the inlet has a 3/4 " male thread with a cap - I'll find a female match with tail . The outlet has a ball valve 3/4" and a stainless steel inlet pipe. The mouldings look good - and it's got some securing points on the top . Definitely keen to give these a go !
The outlets seem to be at the side bottom centre which seems a more logical place to both control open/ closing each tank - as well as an easier place to service and maintain tanks .
I just found this on AliExpress: | Foldable Water Storage Container 110L/240L Collapsible Soft Water Bladder Bag for Drought Resistance Fire
a.aliexpress.com/_mt5141B

I just found this on AliExpress: | Water Storage Containers Foldable Portable Tank Large Capacity Water Bag Drought Resistance Water Storage Containers 240L 110L
a.aliexpress.com/_mrpJHgp