Scraping of barnacles and exposing a hole!

9 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
13 Dec 2016 7:25am
i just have had 50kgs of barnacles on the bottom f the keel. Not much on the hull apart from slime really but it's all off including a round hole about half the size of a 5 cent piece. I was scraping and this small piece chipped off at the very top of the keel. My hull is black and this exposed white. It's probably 3mm into the hull/keel
I'm a bit concerned and now thinking of slipping sooner rather than later.
the keel is moulded into the hull shape on the Tophat and this little chip off is right at the top of the keel before the curve changes into hull.
should I be concerned or just she'll be right mate?
im gonna try and get to the Ulladulla slip possibly over Xmas holidays as I'll be down that way.
Whats the best way to repair this? Epoxy kit ok?
Ramona
Ramona
NSW
7757 posts
NSW, 7757 posts
13 Dec 2016 8:44am
Selley's Knead it.

Break off a suitable amount and knead it in your fingers. You can do it snorkeling but a lot easier with a hookah. Just jam it in the hole and the water will be forced out. Goes off fairly fast so don't mess about. It's a temporary fix so you will have to replace in the next 20 years or so.
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
13 Dec 2016 9:17am
Wow so i can do this while boats in water?
josusa
josusa
WA
110 posts
WA, 110 posts
13 Dec 2016 7:29am
Knead it is fantasic stuff I use it all the time. I have not done a water fix before but you are supposed to be able to. Used to use it on my tufflite epoxy surfboards. Just need to have a roughish surface to get it to bond.
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
13 Dec 2016 10:18am
josusa said...
Knead it is fantasic stuff I use it all the time. I have not done a water fix before but you are supposed to be able to. Used to use it on my tufflite epoxy surfboards. Just need to have a roughish surface to get it to bond.


An underwater sand maybe?
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
13 Dec 2016 10:24am
Sounds like a must have in a fibreglass boats toolbox!
Thank.you so much for this.great info.
fishmonkey
fishmonkey
NSW
494 posts
NSW, 494 posts
13 Dec 2016 3:09pm
Sectorsteve said..
Wow so i can do this while boats in water?


yep, if you get the Aqua stuff:

www.selleys.com.au/products/adhesives/minor-repairs/selleys-knead-it-aqua
slammin
slammin
QLD
998 posts
QLD, 998 posts
13 Dec 2016 3:49pm
It does work in water but not if there is any sort of pressure pushing it away. I've used it for old watertanks, it works inside the tank but not outside. It may help repair a holed hull from the outside but not the inside.
Jode5
Jode5
QLD
853 posts
QLD, 853 posts
13 Dec 2016 4:22pm
It sounds like it may be an osmosis blister. If it is, it will be ok till you slip at Christmas time. Then have someone who knows have a look at it while it is out of the water. Just bogging an osmosis blister is not a good fix
Ramona
Ramona
NSW
7757 posts
NSW, 7757 posts
13 Dec 2016 5:39pm
Sectorsteve said..
Wow so i can do this while boats in water?


Certainly. Easiest way is to have an offsider in a dinghy prepare the knead it and you just dive down and jam it in place.
Sectorsteve
Sectorsteve
QLD
2195 posts
QLD, 2195 posts
13 Dec 2016 5:29pm
Brllliant! once again some great advice!!!
was gonna call into greenwell in a few weeks but ive had to call jervis off for a xmas holiday due to a sick, spolied cat. 8k spent and counting.
shes a family member though and much loved...in hospital now in icu so will just have to be close to syd. pittwater and bundeena instead of jb....i was soooo looking forward to going down there and ive been prepping the boat mostly for whits, but also for JB this xmas!!!!
possibly might look at a mooring in greenwell and come and go. we will see. ill contact you on the greenwell yachts fb page if so.
Please Register, or first...
Topics Subscribe Reply