VDO Electronic Sumlog - Free.

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
9 Aug 2015 1:55am

I doubt there will be any takers on this unless someone has one and would like to have some back up spares. I do not know if the unit works or not and I had to cut the cable to get it out. The transducer is a paddle wheel unit and requires either a hole through the hull or transom mounting which would not be difficult to fabricate.

If you want the through hull fitting and the blank, you will have to wait until I next slip when the hole will be filled in.

First to PM me gets it. Here it is.








madmission
madmission
VIC
234 posts
VIC, 234 posts
9 Aug 2015 12:35pm
i am in need of replacement parts for the same model
pm sent
cisco
cisco
QLD
12365 posts
QLD, 12365 posts
9 Aug 2015 5:37pm

It is yours mate. PM with address. Cheers.
DrRog
DrRog
NSW
608 posts
NSW, 608 posts
9 Aug 2015 8:27pm
cisco said..

I doubt there will be any takers on this unless someone has one and would like to have some back up spares. I do not know if the unit works or not and I had to cut the cable to get it out. The transducer is a paddle wheel unit and requires either a hole through the hull or transom mounting which would not be difficult to fabricate.




What a brain fart I had, Cisco. lol Also have that model as it happens.
HG02
HG02
VIC
5814 posts
VIC, 5814 posts
10 Aug 2015 1:26am
DrRog said..

cisco said..

I doubt there will be any takers on this unless someone has one and would like to have some back up spares. I do not know if the unit works or not and I had to cut the cable to get it out. The transducer is a paddle wheel unit and requires either a hole through the hull or transom mounting which would not be difficult to fabricate.





What a brain fart I had, Cisco. lol Also have that model as it happens.


Well looks like you both are in luck I also sent you a PM Dr Rog as I have one to go as well my paddle wheel looks like new.
Originally I thought the lens was crazed and I could see thought it tried to buy a new lens not available . So I fill the hole in where it was fitted. Later on while looking at it I removed the lens only to find it has a double lense once I removed it and clean its not to bad
DrRog
DrRog
NSW
608 posts
NSW, 608 posts
10 Aug 2015 7:00pm
Mate that's great, HG. My paddle wheel must be sticking or something. It reads when the paddle turns but... anyway, I'd love it. I'll be in touch. Cheers.
HG02
HG02
VIC
5814 posts
VIC, 5814 posts
10 Aug 2015 7:49pm








RDr rog.
This one had two lenses an inner one and the outer they pull apart I started giving it a sand with 1000 grit but never got around to finishing it . Ive done the same thing with some of my water cooling blocks ( P.C.'s) when they were sold cloudy they come up clear
Id buy some 2000 grit paper and then give the lense a a polish with some good car polish
The paddle wheel looks like its never been used its been sitting in the holder in the bilge the plugs in the hull opening hope its the one your looking for

Pm me your address ok










HG02
HG02
VIC
5814 posts
VIC, 5814 posts
10 Aug 2015 8:13pm
hope thats the model your after Dr Rog
Its the same paddle wheel as Ciscos
DrRog
DrRog
NSW
608 posts
NSW, 608 posts
10 Aug 2015 10:57pm
HG02 said..
hope thats the model your after Dr Rog
Its the same paddle wheel as Ciscos


Exactadmundo, HG!
bluesurfer
bluesurfer
NSW
5 posts
NSW, 5 posts
26 Aug 2015 9:33am
damn im after one of these also... too late.. anyone else got one my outer clear cover is broken
crustysailor
crustysailor
VIC
871 posts
VIC, 871 posts
26 Aug 2015 10:22am
I think I've still got a set in the garage, If not it was there until the last clean up only a few months ago.

Here's me thinking I could not even give it way.

If I find it on the weekend, happy that it also goes free to a good home...
HG02
HG02
VIC
5814 posts
VIC, 5814 posts
26 Aug 2015 11:34am
DrRog said...
HG02 said..
hope thats the model your after Dr Rog
Its the same paddle wheel as Ciscos


Exactadmundo, HG!


Sorryfor the delay ive found a few extra bits and pieces thative dropped into the box rog
And i want to check the boat for any more cables this week end
When i lift her out nexy ill also send you the bung
bluesurfer
bluesurfer
NSW
5 posts
NSW, 5 posts
27 Aug 2015 8:23pm
please get in touch crusty ive been searching for months .. thanks

Please Register, or first...
Topics Subscribe Reply