Hey all. I hope your all getting out there and paddling hard?
I am going to put in an FCS plug on the nose of my board tonight but had a question on the positioning.
Should I put it on the centre line of the board or off set it?
The reason I ask is because the lense is not in the middle of the camera.
If I put it in the cetre of the board would the footage look too off set?
The last mount I off set the mount just so the footage would come out in the middle. But I didnt want to mount the FCS plug off the centre line as it would look stupid when Im not using the camera which is more often.
Thanks for your thoughts

In terms of the lens being off centre on the camera, it's only about 1 cm off centre and with the fish eye extreme wide angle lens, I don't think you'd notice the difference. I haven't mounted an FCS plug for my GoPro, I just tape it down each time, nearly lost it with cheap Gaffer tape a couple weeks ago. With the FCS plug, do you have any control to pan the camera from side to side to realign the shot? No doubt you still have tilt control up and down.

Just stick the plug in the center Greenie.. That's what I did.

DJ

Oh and by the way... Dont use 5 minute aryldyte to stick your FCS plug in. First it starts to get really hot. Then it starts to smoke. Then turns into hot jelly crystals
I hit panic stations and rang my good friend Rider who mixed up some proper resin at 10pm last night