Quad Fins

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Pando71
Pando71
NSW
137 posts
NSW, 137 posts
22 Feb 2012 4:58pm
Hello all! Just bought my 9'11" PSH WR , I've ridden it as a thruster set up, can anybody tell me how it goes as a quad set up, and which quad fins are recommended?
Cheers!
Scottt
Scottt
WA
5 posts
WA, 5 posts
22 Feb 2012 2:52pm
Hey Pando,
I have future conrollers on mine and it is nice and loose but still has heaps of drive you could also try the Psh quad set
Scott
bigman
bigman
QLD
233 posts
QLD, 233 posts
22 Feb 2012 10:34pm
Have a set on order for my 8' 6" WR, will let you know how they go
hilly
hilly
WA
8132 posts
WA, 8132 posts
22 Feb 2012 8:51pm
GL really good bigger waves
PSH go really well in mid sized waves jurys out on bigger stuff, nice compromise
SA great in smaller waves really loose
wazza66
wazza66
QLD
622 posts
QLD, 622 posts
22 Feb 2012 11:19pm
Try the Pancho Sullivan fins on the front and controller rears at the back.

This is the same as the PSH quad fin setup.

Give AA a call at Balmoral Surf

I run this set on all my PSH rippers and they are awesome....good drive and looseness/pivot.
Pando71
Pando71
NSW
137 posts
NSW, 137 posts
23 Feb 2012 5:48am
Thanks for the replies guys, I'll take all the responses no board for sure.
Cheers
Pando
Pando71
Pando71
NSW
137 posts
NSW, 137 posts
23 Feb 2012 5:49am
Pando71 said...

Thanks for the replies guys, I'll take all the responses no board for sure.
Cheers
Pando


oops!, on board I meant ha!
hilly
hilly
WA
8132 posts
WA, 8132 posts
25 Feb 2012 12:27pm
You need a couple of testing vehicles too :-)



wazza66
wazza66
QLD
622 posts
QLD, 622 posts
25 Feb 2012 4:17pm
Hilly, how do you find the Simon's go on the hull riper compared to the PSH set.
What size is the PSH hull ripper?

Waz
hilly
hilly
WA
8132 posts
WA, 8132 posts
25 Feb 2012 3:17pm
wazza66 said...

Hilly, how do you find the Simon's go on the hull riper compared to the PSH set.
What size is the PSH hull ripper?

Waz



That's tomorrows job just took the psh fins out. Hopefully swell jacks as forecast tomorrow and I can find a decent size wave.

9 11 HR
Pando71
Pando71
NSW
137 posts
NSW, 137 posts
26 Feb 2012 10:23am
cheers Hilly, I'll definately try an assortment of fins. I like the quiver mate. Tried my mates 9'2" hull ripper the other day.....unreal!!!! thats my next board for sure!
hilly
hilly
WA
8132 posts
WA, 8132 posts
26 Feb 2012 11:29am
Pando71 said...

cheers Hilly, I'll definately try an assortment of fins. I like the quiver mate. Tried my mates 9 2" hull ripper the other day.....unreal!!!! thats my next board for sure!


SA quads loosen the HR up nicely.

The 9 2 is my pick to, real surfboard feel.
hilly
hilly
WA
8132 posts
WA, 8132 posts
26 Feb 2012 11:31am
wazza66 said...

Hilly, how do you find the Simon's go on the hull riper compared to the PSH set.
What size is the PSH hull ripper?

Waz



Noticeably better cutbacks but less drive from bottom turns, always going to be a compromise depends on what you see as important.

Looking forward to putting them in my 9 2
Pando71
Pando71
NSW
137 posts
NSW, 137 posts
26 Feb 2012 6:35pm
hilly said...

Pando71 said...

cheers Hilly, I'll definately try an assortment of fins. I like the quiver mate. Tried my mates 9 2" hull ripper the other day.....unreal!!!! thats my next board for sure!


SA quads loosen the HR up nicely.

The 9 2 is my pick to, real surfboard feel.


Thats right , it has got the surfboard feel, top to bottom, rail to rail etc, thats the s*#t!
weiry
weiry
QLD
5396 posts
QLD, 5396 posts
26 Feb 2012 7:30pm
Just got a new Naish 9.5 Hokua and thinking of Simon andos 2 Large quads or M7 GX quads, any thoughts guys
Please Register, or first...
Topics Subscribe Reply