NSW
6 posts
Hi guys &girls can anyone give me some advice on fins to loosen up my 10ft x31'' ecs evo tri quad set up
QLD
166 posts
Have you tried sliding the rear fin forward? Or any decent set
Of quads will do the trick. If you want to get real loose grab a hacksaw and chop a foot and a half of the front then reglass (sic)
NSW
598 posts
Looked up the website to see what you have - looks like a long board style - maybe a larger centre fin only for flat water and lonboard style surfing - anybody recomend say 7.5 inch centre fin only?
Steve
2770 posts
Big boards are funny.
I had an 11' r that turned best with a 7" center and 2 small sides
My next 10'6 surfed better as a single 9"
Both my 10'6 "longboard" SUPs work best by far, with a 10.5" center fin in the back of the box.
Experiment... the differences are dramatic.
TAS
2249 posts
Don't know anything about the ECS SUPs but after trying quite a few different setups on my longboard SUP ( 9 5 Jimmy Lewis Striker )I use the Shapers Ruben Roxburgh 2 + 1 set up , really loosened it up .
And use the Jackson Close or shapers surf FX SUP large quads (same fins ) on my shortboard SUPs .
really happy with both setups .
