In Australia they haven't been available from Surftech for a couple of years but the company has been restructured and reorganised and I believe there will be new ones later in the year. There is always a chance you can score one second hand so good luck.

Kagey said..
Cheers Bud, I don't care if its a second hand surf tech or a glass or that carbon stuff they're promoting..just looking to see if there are any knocking about in NZ?...or any other 11' or larger boards?...otherwise I may have to save for an expensive custom

Go on get Roger to build one Hey yar Kagey

Making one is a good option, there's just one catch, I have the 10.6 and I can tell you the dims are very unusual I'm not sure you could find a single blank that would do it

You may be able to get the width by gluing up 2 blanks [ the rails are very low for a LB], but the same thickness will be hard to find I think mine is over 4". Once you take the scab off a big blank, you're usually lucky to get 3 5/8" max.

obct said..
Making one is a good option, there's just one catch, I have the 10.6 and I can tell you the dims are very unusual I'm not sure you could find a single blank that would do it

You may be able to get the width by gluing up 2 blanks [ the rails are very low for a LB], but the same thickness will be hard to find I think mine is over 4". Once you take the scab off a big blank, you're usually lucky to get 3 5/8" max.

I had the 10'6 as well. Good board and not bad in bigger waves either. Perfect for a bigger bloke surfing amongst crowds.

Photos please guys!... Come on, photos!....

Looks like they only the 12 and the 11 now, that's unfortunate they don't make the 10'6" any more I thought that was the best.

I've tried the 12, you really need to make a big commitment to take one one. If only for the sake of carrying it down to the water to launch.

I'm a wee bit over weight at the moment, normally 90 kgs or so. I had a 12' Munoz several years ago I was 105 kgs or so then, I thought it was awesome and I kick myself for selling it! I reckon anything over 9' unless wafer thin..is similar work getting out. That Munoz caught everything and the rides were super long. I had a great session at Mangawhai one morning and was grinning like a Cheshire cat for most of that day..Got to get saving for a nice big board I reckon.

When they were last here, the 10.6 was around $1500, but the 12 was around $1700.