quote:
Originally posted by mathew
Barry Spainer's weblog explains that old-school wave sailors wanted de-power capabilities of non-full-lenth battened sails; where as new-school sailors grew up only using full-battened sails and so prefer the constant power.
Here I go again, opening my big mouth, and I wouldn't want to ague with Mr Spanier. But the so called soft sails came out when sails were cut with more shape, and yes a fully battened sail didn't turn off, it always had a bit of shape.
But then wave sails went flat, and full battens held the sails that way. These sails really turned off, took a lot of wind to give them any shape, that's why they had such lousy bottom ends. (much more so than the soft sails, that only required a light puff to shape them up)
Now there seems to be both schools, some wave sails like north and ezzy have shape built in and don't fully turn off, others are much flatter and are harder to turn on.
But even the sails with shape are much flatter than the first fully battened sails, and still depower enough for wave riding.
quote:
I have always wondered why cams arn't used in wave sails, as the cams will give you more power during wave riding
Don't necessarily wont more sail power wave riding, power comes from the wave, what is needed is control, that's why depowering is desirable at times.
quote:
My question for wave sailing would be, is depowering something of a side effect that you learn to live with?
No, not being able to depower would be something you'd find very hard learning to live with.
For example, I've just started using a borrowed cammed sail for this gps speed challenge thing. Just found gybing with the cammed sail so much harder, I find it much easier to flip the rig when it depowers on the way round.