Cutting down masts

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Tozza
Tozza
WA
160 posts
WA, 160 posts
4 Sep 2007 10:56pm
Hey,

I have some unused 460 masts. Was looking at maybe cutting one down to fit a Severne Micro.

Is it just as simple as lopping some off the bottom section? Will this work ok?

I'm just trying to find a cost effective way to get the girl friend a decent rig for her to learn with. I can find sails around the place but masts are a bit of a pain to pick up second hand, that small.

Cheers,

Toz.
dan berry
dan berry
WA
2562 posts
WA, 2562 posts
5 Sep 2007 4:21am
Hey tozza,
dont ever lop off the bottom as alot of masts are reinforced there for the extension. If you need to cut off anything do it from the tip, technically speaking may affect the flex minimally, better than the base splitting though. How much are you talking about cutting?
puffin
puffin
235 posts
235 posts
5 Sep 2007 9:20am
Don't do it. If you saw off the bottom of the mast, the reinforcement will be in the wrong place for the boom, and your mast will have a high likelyhood of breaking. She will not like that experience.

if you saw off the tip you'll screw up the bend, and your presumably light girlfriend will take a pounding in even light gusts.

Sell the 460's and buy the proper mast. You'll enjoy it on high wind days!

quote:
Originally posted by Tozza

Hey,

I have some unused 460 masts. Was looking at maybe cutting one down to fit a Severne Micro.

Is it just as simple as lopping some off the bottom section? Will this work ok?

I'm just trying to find a cost effective way to get the girl friend a decent rig for her to learn with. I can find sails around the place but masts are a bit of a pain to pick up second hand, that small.

Cheers,

Toz.

sailquik
sailquik
VIC
6171 posts
VIC, 6171 posts
5 Sep 2007 12:31pm
If you are going to cut any mast it is only viable to cut off the bottom. NEVER cut off the top. You would end up with a mast that is super stiff and totally screwed up bend curve. The lack of boom reinforcing will not be a problem for a beginner if you have a good clamp on boom and mast protector, but it will be way too stiff.

For the Severne micro they sell a pretty reasonably priced kids mast that is perfect for them. Another suggestion is to pick up another kids type mast which are often available at very reasonable prices from the right shops.

Other than that, a really soft 370 mast may be ok, like a 370 skinny wave mast or even a 340 rdm but they are pretty rare.

You are definitely on the right track with the Micro sail. It really is important to start new sailors with gear that they don't have to fight with and can have early success with. A wide stable board like a Starboard Start or GO will make a huge difference, as will finding just the right wind and water conditions for that important first experience.

Good luck with it.
Please Register, or first...
Topics Subscribe Reply