I think that stuff is for a Quick Fix, your better off doing a better job to keep water out!

Im no boat builder so what i say could be rubbish!

Good luck

Selleys Kneadit is what I have used... a very user friendly product particularly for quick repairs.

That Kneed It sets as hard as buggery and it looks pretty grim if you don't get it smooth. You should sand it as soon as its hard enough to accept sanding.

I found it works fine, take it everywhere I go.

The "need it" is good for a larger hole type ding .If you only have stress fractures then some epoxy araldite should do the trick.
Neither repair is pretty but they're affective.

Cheers guys,

I Think I will use Stribos method as there is no crater like hole, it is more of 2cm crack I guess, so no real valley to squeeze the Aqua Knead it into, as for cosmetics the board is probably 6 to 8 years old and I feel that the epoxy araldite will fix the problem.

Thanks for all your options and reasons why, I feel much better about what I am going to do now.

Stribo look out if it goes pear-shaped mate I will have to catch you in my Jeep coz I cant sail as fast as you

Cheers guys and good wind in ya undies and the water

GT

Ta Greeny, will do.

Thanks mate