Is a ncx 6.4 and moto 6.4 compatible with a cyclops?

5 months ago
Reply
Register to post, see what you've read, and subscribe to topics.
barthbb
barthbb
104 posts
104 posts
23 Jan 2026 6:23am
I can buy localy a second hand 2024/2025 ncx 6.4 and moto 6.4. Is this compatible with my 430 red rdm and with a cyclops?

Greetings from Bart from the netherlands
yaden
yaden
12 posts
12 posts
25 Jan 2026 8:18pm
I don't think so. I think the pulley on the NCX and Moto has 4 rollers, cyclops uses only 2.
Severne even has a special extension for 4 rollers.

www.severnesails.com/hardware/triple-extension/
aeroegnr
aeroegnr
1778 posts
1778 posts
25 Jan 2026 8:46pm
Largest I've used the cyclops on is a 6.7 blade. You have to remove the pin on the block otherwise the loop won't fit.
SurferKris
SurferKris
499 posts
499 posts
25 Jan 2026 9:32pm
Both the Moto and the NCX have four rollers in the sail, and hence they need three rollers in the extension. The designated RDM extension from Severne is labeled "Triple X".

Note that there is no "pin" to remove in these sails that would make them compatible with the Cyclops extension.
aeroegnr
aeroegnr
1778 posts
1778 posts
25 Jan 2026 10:43pm
SurferKris said..
Both the Moto and the NCX have four rollers in the sail, and hence they need three rollers in the extension. The designated RDM extension from Severne is labeled "Triple X".

Note that there is no "pin" to remove in these sails that would make them compatible with the Cyclops extension.


Aha, there's the difference
Please Register, or first...
Topics Subscribe Reply