Tips for a formula noob

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
shear tip
shear tip
NSW
1125 posts
NSW, 1125 posts
2 Nov 2009 1:10pm
So, in my constant struggle to get mote time on water, I've lashed out on some formula gear. I've test rigged and I'm all set to get very wet this weekend (assuming it stays below 15 knots).

With the weekend racing up north, and I'm heading south, I'll be sailing solo on my first outing. Can any more experienced formula guys share any technique tips so I won't have to call coastal rescue on my first day out?
JayBee
JayBee
NSW
714 posts
NSW, 714 posts
2 Nov 2009 1:15pm
Pplllleeeaaaaasse,

I have seen you sail, and you are more then good enough to survive on a Formula board.

Can you get out any evening this week? I am pretty certain there will be people out some evenings this week. Am thinking of taking a day off (another) to hit the water this week too.

JB
timford
timford
NSW
510 posts
NSW, 510 posts
2 Nov 2009 1:25pm
JayBee said...

Pplllleeeaaaaasse,

I have seen you sail, and you are more then good enough to survive on a Formula board.

Can you get out any evening this week? I am pretty certain there will be people out some evenings this week. Am thinking of taking a day off (another) to hit the water this week too.

JB


I agree John........ Thursday late avo/evening at this stage?
JayBee
JayBee
NSW
714 posts
NSW, 714 posts
2 Nov 2009 1:28pm
Yep, Thursday looks like a great day so far (and I have nothing scheduled that day too).

JB
FormulaNova
FormulaNova
WA
15105 posts
WA, 15105 posts
2 Nov 2009 10:35am
shear tip said...

So, in my constant struggle to get mote time on water, I've lashed out on some formula gear. I've test rigged and I'm all set to get very wet this weekend (assuming it stays below 15 knots).

With the weekend racing up north, and I'm heading south, I'll be sailing solo on my first outing. Can any more experienced formula guys share any technique tips so I won't have to call coastal rescue on my first day out?


From a less experienced formula guy; my tip is don't rig a 12.5m in 16 knots unless you want to go straight up wind or straight down wind.

Another tip is that Narabeen is very shallow for formula board 70cm fins unless you want to know where each sand bank is. Also, Sanctuary Point can be a bit shallow for 70cm formula fins, and something around 60cm works okay.

For a useful tip, wear a pfd under a rash vest as it can make waterstarts easier if you are trying to lift a big rig out of the water. The rash vest is to stop you looking look a tool in the pfd.
JayBee
JayBee
NSW
714 posts
NSW, 714 posts
2 Nov 2009 1:49pm
1 - Get an EasyUphaul (or fashion your own)

www.easyuphaul.com/

2 -Put the chicken strap on, it makes it really easy to get deep downwind in case you get caught out in too much wind for your experience level.

3 - Put your boom really high (forehead high) until it gets windy, then drop inch by inch to maintain control

I think falling in regularly is a major develomental issue for people. I know I do my share, but have noticed some of the really good guys arent carrying much of the burdon.

Jb
FormulaNova
FormulaNova
WA
15105 posts
WA, 15105 posts
2 Nov 2009 11:24am
Also, an important one I forgot to add:

If you hear a 'gunshot', look at your mast first before ducking for cover.
mineral1
mineral1
WA
4564 posts
WA, 4564 posts
2 Nov 2009 11:52am
Shear tip, I purchased a 2004 Starboard 155 and an older twin cam 8.5 for those light wind days. (yep we get them over here in WA) I weight 95kg's
Have only used it 2-3 times, bloody thing is hard on the legs when up and running. And they try to go up hill all the time No idea on how to use one in regards to mast base setting foot straps and so on. But its fun when you get them up on the plane, you will not regret getting it. Keep the sail size down its real tough on the skills if you don’t.
Mineral
shear tip
shear tip
NSW
1125 posts
NSW, 1125 posts
2 Nov 2009 3:00pm
Thanks for the tips guys, useful info!

I've read that you assist uphauling by standing on the upwind side of the board to tilt it to help lift the sail out of the water by getting the board to lift the sail clear of the water. Does anyone do this? I would have thought that it would damage the board?

Does anyone else find the board wants to turn upwind? Is there a trick to keeping the board on a deep broad reach other than pointing downwind and gunning it?

I've read that you steer them with the rig, like an old school one design - COE vs CLR. Is this the case? No footsteering at all?
JayBee
JayBee
NSW
714 posts
NSW, 714 posts
2 Nov 2009 3:12pm
shear tip said...

Thanks for the tips guys, useful info!

I've read that you assist uphauling by standing on the upwind side of the board to tilt it to help lift the sail out of the water by getting the board to lift the sail clear of the water. Does anyone do this? I would have thought that it would damage the board?

Does anyone else find the board wants to turn upwind? Is there a trick to keeping the board on a deep broad reach other than pointing downwind and gunning it?

I've read that you steer them with the rig, like an old school one design - COE vs CLR. Is this the case? No footsteering at all?


1- Using the board for additional leverage - Sometimes
2 - Does it damage the board - Always possible
Best to use an EasyUpHaul and not worry about the above

3 - Board turning Upwind. No trick, just present your balls to the gods and hope they return them uninjured.

4 - Steer them as normal. Because of the size of the rig it you can use it to help you turn but it is not the primary mechanism. If you want to bear away you can subtly tilt the rig forward to assist. It is not a huge movement like when learning, everything is subtle.

JB

FormulaNova
FormulaNova
WA
15105 posts
WA, 15105 posts
2 Nov 2009 12:32pm
shear tip said...

Thanks for the tips guys, useful info!

I've read that you assist uphauling by standing on the upwind side of the board to tilt it to help lift the sail out of the water by getting the board to lift the sail clear of the water. Does anyone do this? I would have thought that it would damage the board?

Does anyone else find the board wants to turn upwind? Is there a trick to keeping the board on a deep broad reach other than pointing downwind and gunning it?

I've read that you steer them with the rig, like an old school one design - COE vs CLR. Is this the case? No footsteering at all?


If you are more a casual sailor than formula racer, like myself, I can recommend getting smaller fins than the 70cm ones. In my experience a shorter fin can allow you to sail easier on a broad reach.

I cut down a spare maui fins 70cm to 62cm and it helped, as well as with the depth issue.

AUS-057
AUS-057
QLD
466 posts
QLD, 466 posts
2 Nov 2009 3:07pm
Hey Sheartip,

Welcome aboard. Be careful Formula is very addictive. You'll be fine as you are a better sailor than me. Here are a few things Ive learned to make it easier.

1. Formula boards are designed for upwind/downwind... Not very comfortable reaching...

2. Uphauling...I've made an easy uphaul like the guys said. Start with a spare 2feet of rope. Tie it to the bottom of the rope to the uphaul and make a loop at the other end. Keep tieing knots in the rope until it is about the right length when uphauling. Other than that its easier when the nose of the board is to wind.

3. Harness lines. Get adjustable ones around the 26" mark. One big tip I received from the better guys was to really shorten the lines for upwind. Makes it much easier to apply rail pressure to point properly.

3. Upwind. Really push the foot of the sail on the deck. Again helps upwind.

4. Downwind... Let off those harness lines, hang on and feel your legs burn.... Make sure that you are putting lots of pressure on the rear leg otherwise the nose dips. Use the sail COE to push the board downwind.

5. Read lots on the internet. www.carbonsugar.com (AUS-120) is fantastic.

I'll try and get out Thursday night too.. Hopefully see you all there.
shear tip
shear tip
NSW
1125 posts
NSW, 1125 posts
2 Nov 2009 5:02pm
Thanks for the tips, keep 'em rolling!

I've been looking around the web for info and it's all high performance race tuning tips, none oriented to someone just starting out in formula. I'm just trying to avoid getting stranded on my first outing!

My main concern is sailing solo. I'll be in safe waters (St Georges Basin) but there's a lot of uninhabited bush around there. Not an easy place to call in the car and pick me up.

I've heard about loads of masts snapping - maybe leaving them in the sun too long? What are some other common breakages I should look out for? If I snap an arm off my boom, will it be strong enough to sail back home with only one boom arm for support?

I'm thinking about getting a small backpack and carrying a small repair kit / rope / screwdrivers etc, just for my solo adventures.

Good / bad idea?

Just itching to get out on the water and sail all over the bay!
JayBee
JayBee
NSW
714 posts
NSW, 714 posts
2 Nov 2009 5:33pm
Masts breaking can be an issue if you leave your gear rigged in the sun - especially if there is no flow of air over it.
It is much less common for rigs to break on the water unless they are mistreated.
Just make sure that downhaul is the last thing you do before you hit the water, and keep the rig in the shade when rigging up.
And most of teh masts that broke did so early in their life. If a mast lasts 6 months it is not defective. But knocks can cause stress points and result in breakage.
I havent heard of a Formula boom breaking such that you could not sail back to shore.
On older sails they generally let go at the mastcap or at the tack. Check yours carefully before you hit the water. Downhaul rope should be replaced by Formuline as soon as you can.
I have also broken a UJ, but that is as with all other disciplines types anyway.
If you sail somewhere with bigger waves (or shoredump) watch out for your battens, best to lift the whole sail out of the water when coming ashore. (Will not be an issue at St Georges basin)
Do be careful about depth, hitting the ground with your 70cm fin is real easy to do.

JB
Brett Morris
Brett Morris
NSW
1205 posts
NSW, 1205 posts
2 Nov 2009 5:45pm
Great to hear you are doing some sailing down at Georges Basin....there was a bunch of guys and a popular club only a few seasons ago...Maybe some of them will read this post and get motivated again to start it back up? If you can get to some of the Formula events then we can organise some rigging, sailing seminars as there seems to be some real demand from all the new people...cheers
shear tip
shear tip
NSW
1125 posts
NSW, 1125 posts
2 Nov 2009 5:58pm
Heh, thanks for the links David. Looks like there are some beginners tips too:

Gestalt
Gestalt
QLD
14968 posts
QLD, 14968 posts
2 Nov 2009 5:05pm
the burning leg sensation is due to incorrect fin/board match.

there is a vast difference in fin stiffness with formula fins and the width of the tail needs to suit the lift of the fin.

so if your legs are burning then get s stiffer fin, getting a shorter fin will do nothing if it is a soft fin.

also, broad reaching on formula kit isn't that hard, just crank on the downhaul and/or use the bottom eyelet in the clew.

if you are still feeling too powered up then go deeper. the ball tearer in formula is broad reaching hiked out driving off the back leg with your hips swinging forwards.
FormulaNova
FormulaNova
WA
15105 posts
WA, 15105 posts
2 Nov 2009 3:29pm
shear tip said...

Thanks for the tips, keep 'em rolling!

I've been looking around the web for info and it's all high performance race tuning tips, none oriented to someone just starting out in formula. I'm just trying to avoid getting stranded on my first outing!

My main concern is sailing solo. I'll be in safe waters (St Georges Basin) but there's a lot of uninhabited bush around there. Not an easy place to call in the car and pick me up.

I've heard about loads of masts snapping - maybe leaving them in the sun too long? What are some other common breakages I should look out for? If I snap an arm off my boom, will it be strong enough to sail back home with only one boom arm for support?

I'm thinking about getting a small backpack and carrying a small repair kit / rope / screwdrivers etc, just for my solo adventures.

Good / bad idea?

Just itching to get out on the water and sail all over the bay!


If you sail at 'Sanctuary Point' in St Georges Basin (good in NE or S, not W), the other side is the national park, and it is pretty easy to drive to the other side as its part of the national park and the road is surprisingly close to the shore in some places. It does get very shallow on that side though.

If you were to get stranded on the other side, there are actual parking/picnic spots there, and easy enough to coordinate someone picking you up there.

I am not sure what the place is called other than 'the boat ramp', but on a decent sailing day you'll see plenty of other sailors there. You should also see a lot of boats with people out fishing, so it's not that remote.

I have broken masts while rigging and as I carried my rig to the beach. Both times were on hot not very windy days. Not while sailing, probably because I get them wet a lot.





djl070
djl070
WA
290 posts
WA, 290 posts
2 Nov 2009 4:51pm
FormulaNova said...

shear tip said...

So, in my constant struggle to get mote time on water, I've lashed out on some formula gear. I've test rigged and I'm all set to get very wet this weekend (assuming it stays below 15 knots).

With the weekend racing up north, and I'm heading south, I'll be sailing solo on my first outing. Can any more experienced formula guys share any technique tips so I won't have to call coastal rescue on my first day out?


From a less experienced formula guy; my tip is don't rig a 12.5m in 16 knots unless you want to go straight up wind or straight down wind.

Another tip is that Narabeen is very shallow for formula board 70cm fins unless you want to know where each sand bank is. Also, Sanctuary Point can be a bit shallow for 70cm formula fins, and something around 60cm works okay.

For a useful tip, wear a pfd under a rash vest as it can make waterstarts easier if you are trying to lift a big rig out of the water. The rash vest is to stop you looking look a tool in the pfd.


You can get big formula weedies made by Select and they work well,I use one on a Fanatic formula board without issue
timford
timford
NSW
510 posts
NSW, 510 posts
2 Nov 2009 10:08pm
maybe tomorrow avo fellas?
Leman
Leman
VIC
672 posts
VIC, 672 posts
5 Nov 2009 9:35am
Thought I would use this thread since all the Formula fellas are posting.

I bought an old Formula a while back to get more t.o.w. over my smaller gear (best move I ever did). I used it with a 8.5m, will get a large rig one day hopefully. I realise my 70cm fin does the job but is too big for the sail, resulting in having to walk it out further and more drag and lift when it hits 20+knots. What size fin could I drop down to to get the same upwind ability on a 8.5m sail without all the downsides of an oversized fin?

Thanks.
Gestalt
Gestalt
QLD
14968 posts
QLD, 14968 posts
5 Nov 2009 11:32am
i run an 8.5 with a 70cm Deb or curtis,

i have also used a 60cm curtis and for me find it too small and prone to spinout. the thing with formula is the tail width really requires a deep fin regardless of sail size.

only exception is with very soft shorter fins. for eg the C3 67 fin i have is very soft and extremely powerfull. so there is enough lift to enable me to use the fin.
Leman
Leman
VIC
672 posts
VIC, 672 posts
5 Nov 2009 1:31pm
Thanks heaps Gestalt, pretty much the info I needed. You've probably saved me a bit of money on a new fin. Much appreciated.
Please Register, or first...
Topics Subscribe Reply