Hi guys, does anybody in Perth have one of these fins that they dont kneed anymore? Its from a Tyronsea board
Young lady at work elected to purchase some "good gear" to learn on from the local rag.
Unfortunately she damaged the fin in first session
Fin size is as is on a sheet of A4 paper.

Hey minas, yep that's a standard US box, think I may have an old one in the shed.
Are you coming down soon, other wise I'll try and remember to bring it to the presentation.

It can be fixed of course, just need to drill another hole as close to the old one as possible, and still have some strength, fit new stainless or brass pin and reshape the rear so it can slide in the slot.

decrepit said...

Hey minas, yep that's a standard US box, think I may have an old one in the shed.
Are you coming down soon, other wise I'll try and remember to bring it to the presentation.

It can be fixed of course, just need to drill another hole as close to the old one as possible, and still have some strength, fit new stainless or brass pin and reshape the rear so it can slide in the slot.

Decrepit, be great if you have one, thanks. I will bring this one Sunday so you can splainme how to fix it for her.

Hello to all. I am very very new to windsurfing and i just received a 350 elite tyronsea windsurf. i am missing the rear fin of the board and i am not sure where i can get one from. I would appreciate if anybody could give me some advice. Thanks again guys.