masts

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
gavnwend
gavnwend
WA
1374 posts
WA, 1374 posts
11 Jan 2016 7:07am
Whats the most you can cut down a masts without affecting the bend curve .be told only the bottom can be taken off.its a 520 c.c mast
Tardy
Tardy
5354 posts
5354 posts
11 Jan 2016 10:31am
Not sure .about that answer ..not many do it .because your not meant to do it ...but a mate cut 100 ml off ..seems to work ok .
trade it in for a smaller one is another idea .
Yves
Yves
WA
134 posts
WA, 134 posts
11 Jan 2016 12:31pm
Wouldn't cut more than 150mm, from the base, as there is the question of the diameter of the extension and also the boom reinforcement area that will go down.
Bend curve will remain unchanged.
NotWal
NotWal
QLD
7436 posts
QLD, 7436 posts
11 Jan 2016 6:06pm
I wouldn't do it unless you're a heavy bloke.
The curve may remain close to spec but longer masts are stiffer than shorter ones. That doesn't change.
gavnwend
gavnwend
WA
1374 posts
WA, 1374 posts
11 Jan 2016 4:24pm
NotWal said...
I wouldn't do it unless you're a heavy bloke.
The curve may remain close to spec but longer masts are stiffer than shorter ones. That doesn't change.


Thanks everyone the problem is the mast is 100% carbon near new the sail spec is 516cm luff l took collar off extension still cant get downhaul spec .only going to chop 6cm off .
Tardy
Tardy
5354 posts
5354 posts
11 Jan 2016 4:34pm
Should be cool ...that s nothing really ..tape around the mast before cutting it will stop it splintering up the mast it probably won't ,but its worth doing just incase ..
gavnwend
gavnwend
WA
1374 posts
WA, 1374 posts
11 Jan 2016 5:46pm
Tardy said...
Should be cool ...that s nothing really ..tape around the mast before cutting it will stop it splintering up the mast it probably won't ,but its worth doing just incase ..


Tape around above cut good idea! Thanks
racerX
racerX
463 posts
463 posts
11 Jan 2016 5:52pm
gavnwend said...
NotWal said...
I wouldn't do it unless you're a heavy bloke.
The curve may remain close to spec but longer masts are stiffer than shorter ones. That doesn't change.


Thanks everyone the problem is the mast is 100% carbon near new the sail spec is 516cm luff l took collar off extension still cant get downhaul spec .only going to chop 6cm off .


I nearly did the same once, I had a 530, and old code red 9m, never touched the mast, glad I left it alone. It was about 15cm too long.

Can you at least rig it with the excess extension, you might find the tension too extreme and the mast just snaps. Those big masts and race sails especially some brands at certain model years push the boundaries a little.
Mark _australia
Mark _australia
WA
23682 posts
WA, 23682 posts
11 Jan 2016 8:21pm
Almost new 100% mast sounds expensive. Nobody will want to buy a cut mast from you later...
Buy a cheap 75% mast that works, or cut a cheaper one?
Please Register, or first...
Topics Subscribe Reply