since there is already some discussion about doing something with the mast track on a BIC --what about a FUC board ?
FUC = Fanatic Ultra CAT

the clip that locks to the track broke off and super glue did a better job than epoxy


as you can see, i retrofitted the mast base to allow US mast extensions to be used and put some extra hardware to ensure it all stays together - in this photo i made it hold in place when the clip was broken OFF


the mast track allows adjustment on the fly, butt rarely did this and now not
and so... the thought was - why not find a way to put modern mast track on the board ?
i love this board in light winds - under 12 knots - it gets me on the water and is much faster than KONA

so, any thoughts on this ? remove the screws and put new track on or ??

This is what it looks like

hey joe, your track is 1st generation, 1980's fanatic, i had the same track on my cobra raceboard.
if i remember correctly; that tab that broke off was replaceable and held on with a screw? and if not, wouldn't a small self taper and glue fix it?

www.larsonsport.com/c/404.php