could be signal problems inside the car?
could you check the display while you where driving?
what does the track look like? Is it full of red lines?

Signal was ok I think.
I didn't watch the real time display.
Track is complete there and back.
Yes there are red lines - not a hell of a lot. What do they mean?
<ed> Yes it is full of red lines.

<ed again> Recorded max speed is 66 knots - sounds about right.

I don't know if I'm recording in track points or doppler. The file is a text file with lots of track points on it so I assume its track points. I thought doppler was just about the real time speed calcs.

The red lines, are what realspeed considers to be invalid, usually due to lose of satellite signal.

Think what Mineral meant was are you calculating from doppler or trackpoint data.
Doppler is more reliable but normally gives a lower result to trackpoints, but only fractions of a knot. (faulty trackpoint data can give wrong very high speeds, as far as I know, not low speeds)

elmo said...

Go to options

Change the speed threshold from 50 knots to 100 and all should be sweet in the world

Cant find that setting. Is it in settings?

vando said...

NotWal said...

elmo said...

Go to options

Change the speed threshold from 50 knots to 100 and all should be sweet in the world

Cant find that setting. Is it in settings?

Tools/Options

Dont have a "tools" menu. There's "settings" and "misc" and just the user intreactive stuff.

oh yes.

TimeMachine said...

Hey David, it could be that the max speed setting is still set to 50 knots. Go into Tools/Options and set the Speed Threshold to 100 or some other impossible speed. This should allow the max speeds to show up in the results.

Mal

Now you tell us!

How many of us have cracked 50 Kn and not known about it?

I knew there was something wrong because I've been goin really fast mate.