Choco, me as well as you I don't feel so bad now.

Go back in to your set up and set the card as "card size" not what you set it at. I set mine at 1260b I think, but its :"card size " that is the setting.

Mineral

you can combine the data.

this worked for me

open the file in notepad then copy and past the info from the other files into the one file. then resave.

just make sure your data is in the correct order.

quote:

---

Originally posted by decrepit

Agree with mineral & Troppo.
"memory card" > "file size" should be set to "card size". That should produce only one file per on/off cycle.

and multi files can be combined by copy/paste with notepad.

---

Opps, failed to mention Decrepit was the one who put me and a few others right with setting of card size. (I forgot who it was)
How embarrassment
Thanks again

Changed the card setup to record binary data, works OK, but how do you combine files?????
Notepad works fine for text files, but doesn't seem to work with binary files.
I tried it but realspeed didn't want to know about the combined file.

More great news on the Locosys GT11...

The new Data Logger with full precision data has been released in the latest beta firmware V161(B0717a). Now you dont even need an SD card to get over 7.5 hours of recording that includes all the data we require and at full precision for the best possible accuracy. I have updated RealSpeed (1.911) to read this latest binary format.

And I have just heard from Tom Chalko that the new "n" second readout on the unit will be available soon. Here is what he said...

"The "Max Average" speed feature will be available in GT11 in a few days.

Details:
1. N-second average speed computed in the real time with MAX value of
the average speed displayed (since the last save)
2. N in the range 1-60 seconds
3. Trapezoidal rule of speed integration for maximum achievable
accuracy of the average speed (the same accuracy as software)
4. Capacity to save/recall average speeds for at least 10 runs in
GT11 cyclic buffer
5. No invalid points used to compute the average speed

This feature should enable sailors to estimate their 10s or ~500m
average speed on the water, without extra computers.
The "recall" feature will enable people to take photos with their
records on their GT11 displays at the end of the day."

What this means is that you can set your GT11 to show a 10 second average for example, or perhaps a 23 second average to represent an approximate speed over 500m. After your run, just take a look at the result on the screen and save it off. If you have two GT11s you could see both results.

quote:

---

Originally posted by TimeMachine

Mike, are you using the latest Beta 1.911? If you are can you send me your multiple files and I'll figure out what is going wrong. If not, can you download it and try it out?
Thanks! Mal

---

Thanks Mal,
No I'm using 1.906, that allows me to open one file and import another, but I can't see anyway to combine them.
I'll update to the latest and give it a go.

quote:

---

Originally posted by TimeMachine


Mike, -- First open the files you wish to combine using file open or file import to get several files listed under the TrackFiles item. Then right click the trackfiles item and choose "Create Combined File". This merges all the trackfiles into one new trackfile. You can then save the combined file.

---

Great Mal!!!! Just tried it and that's just what I needed, yesterday we had a long wait between blows, and I turned the unit off to conserve battery and internal memory. Occasionally I share my unit with a mate, so am also likely to end with multifiles in that situation.
If the files aren't combined, things like 5 X 10 sec gets degraded.

Firebob, Can you download the flash memory to SD card and send me both files so I can take a look at it for you? I would like to see wahtis going on. Also, let me know what your settings were (On, On fix, binary , min speed etc).

Thanks, Mal