Hi, any one know if there is setting or something that I need to change on the GT31 so it will record a long session as one file rather than two? Seems to time out around an hour or so then starts a new file?
I have had this problem as well so I checked the settings which were all as recommended and then went to the KA72 website and found the answer under the
Forums section "Putting two bits of data together". As follows:
"Assuming it is set up properly, you should be able to dump the logger memory onto the card.
Go into the menu, shuffle through to the Data Logger menu and choose the "Save to Card" option.
This will create a new file on your SD card with a file extension of .SBP
You can upload this file."
I followed Dylan's instructions and it worked. Give it a try.
