Garmin 101 RIP

> 10 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Gestalt
Gestalt
QLD
14965 posts
QLD, 14965 posts
4 Aug 2007 10:16pm
Ok,

my very reliable 101 has had the lcd screen die. if i press on the screen i can still sometimes read the display but it is not very reliable and wastes time,

so i figure it's from leaving it in the dry pack and having the moisture inside the bag work it's way into the garmin unit and upset the lcd contacts.

plan is to open up the unit and resolder or apply some alfoil. problem is a can't get into the garmin unit.

anyone know how to pull the thing apart?

should i get out the trusty tungsten hack saw?
vando
vando
QLD
3419 posts
QLD, 3419 posts
4 Aug 2007 10:22pm
quote:
should i get out the trusty tungsten hack saw?
decrepit
decrepit
WA
12884 posts
WA, 12884 posts
4 Aug 2007 8:37pm
most LCD screens I've played with are just a pressure contact, don't think there's any resoldering needed. Think your theory of moisture is probably right.

How to get into it is a different matter, Dr Who's one at the moment, his sonic screwdriver would be handy!
Haggar
Haggar
QLD
1670 posts
QLD, 1670 posts
4 Aug 2007 11:09pm
I think Fitz replaced his LCD screen
choco
choco
SA
4186 posts
SA, 4186 posts
4 Aug 2007 11:08pm
stick it in a microwave oven and see if that helps.......
nebbian
nebbian
WA
6277 posts
WA, 6277 posts
5 Aug 2007 12:38pm
Undo any screws that are holding it together (look in the battery compartment as well), then gently prise it apart with a screwdriver. There are usually a couple of clips around the perimeter of the two halves which snap together. Try prising the top half both forwards and backwards, as well as up, and you'll undo those clips.

Once apart, get some metho on a cotton bud, and clean the contacts for the LCD. Put it all back together, and bob's yer auntie!

hth
Jethrow
Jethrow
NSW
1282 posts
NSW, 1282 posts
5 Aug 2007 3:03pm
From my memory back in the yacht chandlers, the Garmin units are sealed so there won't be any screws to undo. You'll probably have to cut the plastic welded join which will destroy the unit anyway. Sorry
Haggar
Haggar
QLD
1670 posts
QLD, 1670 posts
5 Aug 2007 6:27pm
Fitz, speak up, you've had yours apart
kato
kato
VIC
3530 posts
VIC, 3530 posts
5 Aug 2007 6:41pm
Email Tom at Mt best,he,s fixed a few of these things
fitz66
fitz66
QLD
575 posts
QLD, 575 posts
5 Aug 2007 9:16pm
Calm down Haggar i sent Gesty a message about it.No screws etc just stuck together, god knows how they can say they are waterproof
fitz66
fitz66
QLD
575 posts
QLD, 575 posts
5 Aug 2007 9:26pm
Mines a 201 so not sure about the battery compartment but there were no screws or plastic weld just glue
ABarwell
ABarwell
QLD
14 posts
QLD, 14 posts
23 Aug 2007 11:43am
Hi Gestalt
I have a spare Garmin Fortrex 101 that I want to sell. Perfect condition & always used in an aquapack. Only $120
Interested? I'm on Sunshine Coast
Please Register, or first...
Topics Subscribe Reply