#@%$^^ old age, swear I just relied to this, must have hit the wrong button!
OK I'll have another go.
>>>>>>>>>>>
Bluetooth - Off
woops, not sure about this, but I'm sure somebody posted problems with the bluetooth version, something about latest firmware not working properly with it, if you have trouble you may need to check on this.
>>>
Speed average time - 1 sec
This works in speed genie and is the speed that the average is calculated for, and the 10 best results are held in memory. I have mine set to 10sec, that way by looking at the best 5 I have an idea of my 5X10.
Speed genie - Off as I have no idea what this is
This is a smart idea, meant to alleviate the problem of operating the toggle inside the aquapack. At the set speed, it resets the maxspeed display, so you can see the fastest speed for that run. I have mine set to 30kn, but may set it a bit lower, as on longer runs when I drop below 30kn in the middle of the run, I only see the max speed for the end of the run. Trouble with setting it too low is that it will reset on the upwind leg, I find I stop more often at the end of the return run than the end of the downwind run.
DATA LOGGER -
Interval - off by default
Min speed - 1 kts
this is another good innovation, it records in .bin files that are much smaller than the old track files. the old way only records 2.5hrs the datalogger records 7.5hrs or more.
Set Interval to 1sec
Min speed about 3kn (this is the speed above which recording starts, meant to get rid of time spent walking around.
I think to get the best of the datalogger all catergories under "track" should be turned off.
