VIC
115 posts
When a speed board is developed and tail rocker is taken into account, how far back from the back of the board should the rocker start to tapper up, and what sort of tapper is preffered, love to hear poeple's thought's on this.
NSW
2016 posts
ill take a guess and say a slight rocker from 300 and 2mm @ tail
VIC
6171 posts
No tail rocker at all, but definitely no negative rocker at all. Length of flat depends on the outline and tail width to some extent.
VIC
2424 posts
A tiny bit of tail rocker is good, frees the board up. Even though dead flat is technically correct for speed the board can feel a bit sticky if it has 0 tail rocker. My boards have about 1 - 1.5mm starting from 350 off the tail.
