Hi All - first wingding board repair and wanted to get the advice of those who have been there before :-) I've watched tons of videos but not sure if the FG board construction requires a different approach.

Photo: Small crack(s) on the bottom of the board and there's about a 5cm circle around the cracks where i can feel about 1mm of flex in the 'shell'. The shell is also very slightly raised around the crack area compared to the other side.

I'm pretty sure it hasn't taken on any water. Should I just use some Solarex resin to seal it and keep an eye on it, or cut in deeper to investigate further? Thanks!
P.S. no known impact to the board, no jumping, almost all lake riding, although i am 95kg on a 99l board so coming off foil can be pretty rough :-). Been treating it with kid gloves, and it's at the 10-month mark so out of warranty.

Just seal it up with super glue and see how it goes , I had similar cracks and filled them with super glue and no probs after years. Try get the thinnest glue so it will run into the cracks. Strong easy quick fix if it's nothing more

Hi kiwipover, make sure you get the epoxy solarez.
I've got a eps core surfboard than a fin cut through the wood glass skin into the core.
Initially I was a bit skeptical (having spent time building epoxy sandwich boards) and thought it would be a temporary repair but still going well years later.
With the Kiwi guessing you're in NZ like me and can buy online from NZ Sailing or Torpedo 7.
Good luck

Not good advice if we don't know where it is.
Cracks in line with the tracks can be indicative of a big internal crease you can't see or need oblique lighting and a straight edge to diagnose.

Paint depth only stuff on the nose that can't let water in is so insignificant I'd not even bother.

The little pic is not enough sorry

Hey! How did you get this resolved? I have the same issue with my Armstrong board and wondering how I should handle it.. Thanks!

dbeach said..
Hey! How did you get this resolved? I have the same issue with my Armstrong board and wondering how I should handle it.. Thanks!

Armstrong said it wasn't a warranty issue. It's been fine since it happened - I just sanded lightly and put on Solarez. I don't think it was a crack or anything serious. The board hasn't taken on any water and is still the same weight since I bought it. It just seems like the board construction is light (which is good), and dents easily (not so good) if it's leaning on anything that can exert some pressure.

dbeach said..

kiwiupover said..

dbeach said..
Hey! How did you get this resolved? I have the same issue with my Armstrong board and wondering how I should handle it.. Thanks!

Armstrong said it wasn't a warranty issue. It's been fine since it happened - I just sanded lightly and put on Solarez. I don't think it was a crack or anything serious. The board hasn't taken on any water and is still the same weight since I bought it. It just seems like the board construction is light (which is good), and dents easily (not so good) if it's leaning on anything that can exert some pressure.

Cool. thanks for the info. I'll try the same action plan of sanding and Solarez. Do you need to paint over the Solarez, or did you leave as is?

Left it as-is.