Actimel87 forum posts in last 60 days

Hallo,

im Running the ESP without an SD card. Just the 16MB chip.

Is there maybe an issue with wrong memory calculation?
I had I few sessions without a saved GPS file, only the txt. file.
My guess is, it does not includes the files in the archive section.
Is there an option to completely disable this function?

yes, first attempt was with an M10, it works with an older M8.


can’t I select the required baudrate to 115200 and skip the auto detection?

.TFT Initialized
1.75
Configuring WDT...
Battery voltage = 4.80
Wakeup caused by external signal using RTC_CNTL
No SDCard found!
LITTLEFS Mounted with success. Total space= 13 Mbytes
Free space left= 13 Mbytes
no configuration file found
Failed to deserialize file, using default configuration
EmptyInput
1.75
3.60
1
1
1
ssidNOK
password
1
Print config file...Failed to read file
T5 MAC adress: search SSID1
....ESP32 disconnected to WIFI
..ESP32 Connected to SSID Station mode
ESP32 Soft AP switched off
ESP32 Connected to WiFi Network
Connected to ssidNOK
IP address: 192.168.137.215
mDNS responder started
Setup ESP32 to sleep for every 5 Seconds
Going to sleep now
Setup ESP32 to sleep for every 5 Seconds
Going to sleep now
setup Serial
Serial Txd is on pin: 1
Serial Rxd is on pin: 3
TFT Initialized
1.75
Configuring WDT...
Battery voltage = 4.81
Wakeup caused by external signal using RTC_CNTL
No SDCard found!
LITTLEFS Mounted with success. Total space= 13 Mbytes
Free space left= 13 Mbytes
no configuration file found
Failed to deserialize file, using default configuration
EmptyInput
1.75
3.60
1
1
1
ssidNOK
password
1
Print config file...Failed to read file
T5 MAC adress: search SSID1
..