Beans forum posts in last 60 days

Reply in Topic: wing wave board
Beans
Beans
29 posts
29 posts
4 Jul 2026 7:28pm
Omen Flux V2 -72 lt
Beans
Beans
29 posts
29 posts
15 Jun 2026 6:38pm
It’s the aluminum lift adapter that is loose in the lift fuselage ,if the 2-6mm bolts aren’t really tight the wing has side to side play .when I take the two bolts out the wing just falls off when you should have to use a rubber mallet . When I used to use my list mast the bolts sometimes would be loose when I came in but the mast was still tight in the fuselage .
Beans
Beans
29 posts
29 posts
14 Jun 2026 7:19pm
Thanks Brian maybe yours is different than mine as when I removed the 2 bolts the wing just lifts of or falls off . Did your adapter come from OO or from Stringfellow direct ? Mine as parallel side on it not tapered like the head on the mast . I still love the mast and I hit a huge piece of wood yesterday and went over the handle bar and thought oh no but the mast was un marked ❤️
Beans
Beans
29 posts
29 posts
13 Jun 2026 6:54pm
BWalnut said..
Had my first go on the v2 78sss and it was everything I hoped it would be. Years ago when I first discussed the sss with Jacko he told me that my assumption the Florence 110x would be an awesome match for the 78sss was likely correct. Here we are, a few years later and I had the opportunity to do my first ride on the v2 with a buddies Florence 110x. Originally I described that foil as having "fun, slower, but super enjoyable longboard style turns" (www.wouzel.com/post/shallow-water-exploration-part-2-winging-the-florence-110-x-in-the-gorge). With the 78sss v2 the upgrade was obvious. Snappy performance turns and tight radius carves were now available to me.

I purchased the new Vario 120 with Grubb 16 and Carve 20 tails to go with it. Monster wind forecasted for next week so I'll really get to push it hard but every one of my first impressions was positive.


How did the lift adapter seem . I found it relied on the 2-6mm screw and not the normal wedge fit of the lift mast base .