Jormungandr forum posts in last 60 days

Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
5 Nov 2026 11:30am
EastCoastSail said..
DIY Arid Bilge, I have used this system for 4 yrs.

lifeempirically.com/2018/03/12/build-your-own-diy-arid-bilge-or-dry-bilge-system/


nice!
Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
3 Nov 2026 4:36pm
I am biased, owning a Cavalier 28 myself, but going on the photos and description, this looks like a well maintained boat that might be in good condition with not much to spend except perhaps for rigging.The rigging is reaching end of life for insurance purposes though. So there is an $8000+ bill in the next couple of years. It's got a nice smooth bottom and the owner says it has been stripped back. I did this on my boat last summer and removed 46kg of anti-foul!

www.boatsales.com.au/boats/details/1985-cavalier-28/SSE-AD-21011369/

When I got an insurance survey on my boat last year, while doing a refurbishment, the surveyor (Matt from Avast) said he wished more people would keep these older solid fibreglass hulls going. I believe Cavaliers have balsa cored decks, so it would be worth checking over how solid it is around all deck fittings. I have to re-bed the baby-stay fitting on my boat. I missed doing it during the refurbishment and I suspect there is water getting in through the fitting.

The rudder on this boat is slightly different to mine. My boat is a couple of years older. Cavalier 28s are well balanced, without excessive weather helm, and I find it easy to handle mine single-handed.
Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
3 Nov 2026 4:14pm
How much do you run your engine? I don't use mine very much. About an hour or so a week on average. I have an old school dripping stern gland. There is a little dish like shape moulded into the hull under the stern gland that probably holds a few tablespoons of water before spilling into the bilge. I checked the drip rate of the gland the last time I was on the boat actually. It is dry when I hop on the boat and drips slowly when the engine prop is spinning. I've never needed to tighten mine in the six years I have had the boat. I don't know when the stuffing was last replaced but I figure if it is not dripping excessively and I have never needed to tighten it, it must be fine. I might change my stuffing next time I slip the boat just for the sake of preventative maintenance. For me, the expense is not justified when what I have does the job.

I'm just about to pull the transmission out of my boat for a rebuild but I am going to be doing that in the water so I don't intend to mess with the stern glad on this occasion. Crawling into the stern of the boat through the cockpit locker to access the rear of the engine, transmission and stern gland requires extreme boat yoga on my boat. Not fun.
Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
3 Nov 2026 3:50pm
I've been meaning to respond to the video you posted recently of your Dominic Tarr inspired servo-pendulum wind vane. I might as well post here because my comments kind of relate to both forms of self-steering.

I exclusively solo day sail and don't make long passages. I race on other people's boats because it is cheaper :-) I have a small fin keel boat like yours. I think I posted this same comment the last time you posted these videos:

I don't have any problem steering a course to windward under balanced sails on my boat. The first thing I did when I purchased the boat six years ago was install a WaveFront tiller clutch on my tiller. I run either end of the control line around the forward posts of my pushpit and tension the line using using a midshipman's hitch (ABOK # 1855) at either end. These line can loosen a bit while underway. Sometimes I also use a piece of bungee cord to keep some tension on the line to prevent this and take any resultant chatter out of the tiller. Otherwise, as it is a slip knot, I pull the line to re-tighten while underway. I did buy some cleats that hold better than the awning hitches but it is quicker to set up the control line using the awning hitches. I wrap the control line around the tiller so it tucks into the tiller cover when on the mooring. I don't know how anyone, especially a single-handed sailer can sail without a tiller clutch or something similar to lash the tiller in position.

Lashing the tiller or wheel is the most basic form of self-steering, as used by Joshua Slocum. For me, it works on my boat on anything forward of a beam reach and I am usually sailing in 1-2m swell and sometimes surfing with the swell. With balanced sails the boat will correct course even if it is surfing down a moderate swell. Relevant to the subject of your post above,James Everson tells the story of using a bungee cord to steer when his auto-pilot broke under passage.



As you describe in your video, the sails must be balanced and in practice that means being biased towards being under powered. A flat boat is a balanced boat. Being a solo sailer with a little boat I will reef much earlier, around 12 knots for the first, 15 knots for the second reef. Otherwise, with full main sail up, I find with my boat, I want to trim the headsail so it is fully powered but have the main sail just on the edge of luffing so that it only powers up fully to give enough weather helm to head the boat up when the headsail gets over powered. With the main sail, I position the boom with the traveller so it is nice and centred but just eas the sheet enough to induce a slight luff to allow the head sail to push the boat back away from the wind when she rounds up.

I also find that when the wind is forward of the beam, it doesn't matter hugely if I don't have the exact balance of head sail and main sail set to get the boat to perfectly track with the rudder pointing perfectly straight. I can counter a bit of weather or lee helm in the balance of the sails by setting the tiller a bit off centre.

Lashing the tiller with the wind aft of the beam is hit and miss. Sometimes the boat will track beautifully, but if it gets thrown off balance due to a lull in the wind or a wave it is less likely to self-correct.

I am yet to experiment with any sheet to tiller steering, and because of the above, I am really looking for self-steering solutions for when the wind is aft of the beam. I will try a line directly to the head sail as per your videos. I've bought some surgical rubber cord for the purpose of rigging up sheet to tiller steering. I am also keen to buy a second hand storm jib hoisted from the mooring cleat using a spare halyard I have rigged up. I understand that this can be a good approach that doesn't require the head-sail to be under-trimmed as you experienced in your video. If I find a second hand jib of 5-6m2 cheapI might grab it.

Otherwise, Dominic Tarr's servo-pendulum wind vane and your version look very interesting. This design, with the control line protruding diagonal from the stern and with the whole system able to be set off centre on the stern looks interesting because I have a stern hung rudder and I am not too keen to go mounting a massively heavy frame to the stern. It can be light-weight too because I am just day sailing after all.

What I would love to see is some sea trials of your wind vane with the wind at or even behind the aft quarter. Are you still using the wind vane? Can you update us on your thoughts since you posted this video?



By the way, I am glad you guys mentioned Dominic Tarr in this thread www.seabreeze.com.au/forums/Sailing/General/Impressed-by-the-design-and-finish-quality#2967050 I have been enjoying watching his videos and passages on his wharram cat.
Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
26 Oct 2026 9:21pm
Toph said..
Yes kinda like eat less calories then you spend..

Sometimes, just sometimes, its out of ones hands. So do you just give up something you love?


Time or tide will take us all, but you must fight them both with intent.
Reply in Topic: Bad Weather In Sydney
Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
26 Oct 2026 10:38am
BG973N said..
You’re right on in your opinion , though we are financially stable with a couple of investment properties here , including the one we are currently living in while renovating , while also being employed in the mining industry , for the last decade which comes in handy with my boating expenditure


As a lifelong passionate boater , I look forward to being back in Sydney so my family can enjoy weekends onboard . Spending my youth growing up waterskiing on Sydney’s Hawkesbury River most weekends between 1988 - 98


Then owning a Top Hat Mk1 around 15 years ago , we’d take our children sailing around Pittwater. , and Broken Bay when they were infants .



i know Columbia 27’s haven’t got a great reputation for their sailing ability , though I was after a more comfortable cabin for my lot . Our Columbia 27 is regularly maintained , and is in good shape looked after by a mate of mine who is a marine tech and a keen fisherman on Sydney harbour using her as a base regularly on weekends with his wife and young family
















It is good to know it is getting used.
Reply in Topic: Bad Weather In Sydney
Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
23 Oct 2026 8:57pm
I was working on the roof today and while sweating away my mind was wandering. I was thinking about your Colombia 27 on the Lane Cove River all lonely while you and your family are at Broken Hill.

I don't know whether or not you are hanging onto the boat because you don't want to give up the mooring or whether you intend to use it over the next while. If it is the former, I suggest you think about whether it is worth keeping the boat if you don't think you will be using it over the next couple of years. Small coastal cruiser racers like ours are only going to get cheaper and cheaper, unless for some reason, it is badged Catalina, for some reason (other than their beamy below deck cabin quality).

Three things to consider:

1) Sailing yachts cost money to keep up to seaworthy capability. Yachts that sit in the water and don't get used are a problem. The engine should be run every ten days (I say every week ideally) and not just at idle, but with revs at load. The boat should be moving through the water at the same time interval to prevent growth build up below the waterline. You need to check that barnacles have not grown up in the through hull fittings. I also pump through my marine toilet whenever I am on the boat to keep everthing unblocked. The packing gland needs the engine to be running from time to time to keep from drying out. At Bundeena, the hull needs to be scraped down at least every quarter. If I were racing her, monthly. In the Lane Cove River, you will be getting far less growth. I open and close all four seacocks every time I am on the boat. In January this year I updated them to Trudesign PVC. You need to be on the boat to check over everything. You have seen how rough it is at Bundeena; shackle pins on the rigging undo themselves, but the same will be happening with your boat in slower motion. If your sails are on the boat and it is sitting in on the mooring and not being used, take them off and stow them, even if they are in a boom bag or on a furler. In fact take off the boom bag too. Batteries need to be checked or expect to throw them out and replace them.

2. Boats are only going to get cheaper. Especially small coastal cruiser racers like our. People don't want them any more. There was a time, when our boats were built that they were the sort of boat that people would charter to take their family on for a weekend. Now people like us are the minority. Also, the baby boomers are disposing of their boats because they are getting too old for them. No-one wants old boats. I love my boat. I just had it on hard stand for ten weeks over summer 25/6 for refurbishment. Old fibreglass boats are solid hulls. But, the fact is they depreciate every year, especially the rigging. I want my rigging to be coastal passage worthy. I sail in the open sea along the coast. A boat is costing money. Either through regular maintenance or depreciating while it rots on a mooring as it rapidly becomes and end of life liability.

3. You might be considering the boat a mooring minder while you are working remotely. Fair enough; but, moorings come up, even in the moderately popular areas in Sydney if you are patient.

Summary. Boats need to be used. If you are not using your boat, should you keep it?

Reply in Topic: Bad Weather In Sydney
Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
23 Oct 2026 11:48am
The weather in Sydney has not been unusually wild.

I use to have a Hood 23 moored at Woodford Bay, Lane Cove River. I was at the very back of the bay near the Longueville Sailing Club boatshed. That was a mill pond compared to where I am moored now. Bundeena Bay must be the most exposed mooring field in Sydney, particularly exposed to north-east swell. If there is any easterly component to a large southerly swell, however, it can also be dangerous for moored boats.

The main danger period at Bundeena is Autumn when Sydney gets East Coast lows at the tail end of the Summer cyclone period in the tropics. Here is a video of our boats from April 2025.



The first yacht is a Marzcraft 35 and my Cavalier 28 is the second yacht that comes into view. Sorry about the crap quality. Someone messaged me that video. The irony is that on this occasion none of us moved our boats! The forecast was 5m swell from the south which we should be fairly protected from. That turned out to be 8m SE which ricochetted off Bass and Flinders point and onto Bundeena. I called the mooring contactor the next day and told him to replace everything except the block. He ended up replacing some of the chain and this year he upgraded me to all 20mm chain.

While I was waiting for the mooring contractor, a couple of weeks later we had another southerly blow in and I moved my boat onto the public mooring in Gunnamatta Bay out of precaution and because the next day when the storm was due to hit I had to be at a funeral. While at the funeral the boating officer called me and asked why my boat was on the public mooring. I explained, and he said he needed it because he was dealing with boats breaking their moorings all up the river. A properly serviced mooring should be able to handle a southerly blow and bit of chop on the river. Nowhere else on the Hacking River cops the ocean swell.

I am now much more cautious in moving my boat up river, or, tucking into Jibbon and picking up one of the public mooring (although it can be a bit shallow there on the low tide). The problem with getting up the river is I need plenty of tide to get over the shoals.

Boats regularly break their moorings at Bundeena. In the past couple of years there have been at least four boats that broke their moorings.

The other problem with Bundeena is that the bottom is sand and that quickly wears out the chain. You should be on mud in the Lane Cove river.


Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
3 Oct 2026 11:55am
Stay fit. Stay healthy.
Reply in Topic: Marine Surveyor
Jormungandr
Jormungandr
NSW
40 posts
NSW, 40 posts
21 Sep 2026 3:21pm


Thunbs up for Matt Hundleby, Avast Marine Surveyors.